For consistency, since we already have HAVE_PIPE_LOADER_{SW,DRM}.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Added in e1364530 but never used.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
It's next to useless, since it just allows you to turn off VDPAU and
XvMC with a single switch. Just check whether Gallium drivers are
enabled instead.
Reviewed-by: Christian König <christian.koenig@amd.com>
v2: Remove left over code
v3: Restage properly the commit so hunk of first one are not in
second one.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Currently the vdpau and xvmc detection code, is enabled for all builds. The
state trackers exist only within gallium. Enable whenever at least one gallium
driver is selected
v2: removed stray '-a'
[mattst88 v3]: Removed stray $.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63645
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Since we now have UVD support we should enable them by default.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
configure still uses it to print the enabled winsys.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
configure still uses it to print the enabled targets.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
And don't build it from other Makefiles. That's awful, and breaks
distclean.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
configure still uses it to print the enabled state trackers.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Neither are used in Makefile.ams.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
A step toward working make dist/distcheck.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Just everything you need for UVD with r600g and radeonsi.
v2: move UVD code to radeon subdir, clean up build system additions,
remove an unused SI function, disable tiling on SI for now.
v3: some minor indentation fix and rebased
v4: dpb size calculation fixed
v5: implement proper fall-back in case the kernel doesn't support UVD,
based on patches from Andreas Boll but cleaned up a bit more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Clover needs the irreader component of llvm
v2: Check for irreader component
irreader is only available with LLVM 3.3 >= 177971
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Currently works on a220. Others in the a2xx family look pretty similar
and should be pretty straightforward to support with the same driver.
The a3xx has a new shader ISA, and while many registers appear similar,
the register addresses have been completely shuffled around. I am not
sure yet whether it is best to support with the same driver, but
different compiler, or whether it should be split into a different
driver.
v1: original
v2: build file updates from review comments, and remove GPL licensed
header files from msm kernel
v3: smarter temp/pred register assignment, fix clear and depth/stencil
format issues, resource_transfer fixes, scissor fixes
Signed-off-by: Rob Clark <robdclark@gmail.com>
Commit 67ef7559 added an || test "x$enable_dri" check in an attempt to
get the DRI common bits built in some necessary cases. That change was
inappropriate as it made these common DRI pieces be built
unconditionally, so some builds were broken.
Subsequently, commit 998d975e3 change the "|| test" to a "-a"
conjunction within the existing test invocation. This made the '-a
"x$enable_dri" = xyes' clause have no effect, (as it was inside an
enclosing test for the same condition). So the new breakage from
commit 67ef7559 was addressed, but the original problems were
regressed.
The immediately preceding commit removed the redundant condition.
Now, finally this commit fixes the original problem as described in
the commit message of 67ef7559: this code should be compiled when
using the DRI state tracker. In order to do so, the HAVE_*_DRI
conditionals must be moved after the last assignment of HAVE_COMMON_DRI.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61821
Tested-by: Stéphane Marchesin <marcheu@chromium.org>
X11 is already checked conditionally below.
Fixes OSMesa-only configurations to not require X11.
Note: This is a candidate for the 9.1 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
Commit 86d30dea3c broke building with older
automake versions with this error:
Makefile:769: *** Recursive variable am__v_YACC_ references itself (eventually). Stop.
This patch fixes it. Fix stolen from xorg-macros.
Signed-off-by: Lauri Kasanen <cand@gmx.com>
The third argument of AC_ARG_WITH is evaluated for any provided value,
not only on --with-, so it must not force-enable the feature
Also, setting $with_llvm_shared_libs in the opencl check was overriding
the user switch
https://bugs.freedesktop.org/show_bug.cgi?id=59851
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
GLX uses mapi/glapi/libglapi.la, which is only built for OpenGL.
If the user specified --enable-xlib-glx --disable-opengl, error out, as these
cannot be both observed at the same time. If the user just specified
--disable-opengl but not --disable-glx, print a warning and disable GLX as
well.
NOTE: This is a candidate for the stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59364
Tested-by: Tom Stellard <thomas.stellard@amd.com>
If we build clover with LLVM static libraries, then clover and also each
pipe_*.so driver that is built will contain their own static copy of
LLVM. The recent automake changes have uncovered a problem where
the pipe_*.so drivers try to use clover's LLVM symbols. This causes
LLVM's static registry objects to be initialized each time
a pipe_*.so driver is loaded by clover. Initializing these objects
multiple times is not allowed and leads to assertion failures in the
LLVM code.
We can avoid all these problems by having clover and all the pipe_*.so
drivers link against the same LLVM shared library.
https://bugs.freedesktop.org/show_bug.cgi?id=59334https://bugs.freedesktop.org/show_bug.cgi?id=59534
v2:
- Fix shared library detection when LLVM is built with CMake
In order to determine which static LLVM libraries are needed we pass
a list of components to llvm-config and it generates the list of
library dependencies for us. The advantage of only calling llvm-config
one time is that it can determine if two components depend on the same
library and then add it to the output list only once. The old practice
of having each driver call llvm-config to add its own dependencies to
$(LLVM_LIBS) caused many libraries to be added to this variable multiple
times.
No one tests yacc/byacc. Let's just request bison specifically.
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46815
configure should warn if libxml2 is not found.
libxml2 is needed by glapi/gen.
Fixes error during build in src/mapi/glapi/gen:
ImportError: No module named libxml2
NOTE: This is a candidate for the 9.0 branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31598
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Currently the use of external firmware is required, with kernel and
userspace firmware needed for all Fermi cards except nvd9. Kepler and nvd9
should only require kernel firmware.
Previously, the xmlpool directory had a lone Makefile to assist poeple in
manually invoking a deep make in order to update the translations in
options.h. We can observe that this wasn't happening in fact, (new
translations had been added to de.po without being generated into options.h,
and new options had been manually added directly to options.h rather than to
t_options.h).
Prevent both of these problems from occurring in the future by automatically
generating options.h as part of the standard build of mesa.
For this, the generated options.h is now removed from version control, (along
with Makefile in favor of Makefile.am).
[chadv: Port the Autotools changes to Android.]
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
C++ linking (controlled by the nodist_EXTRA idiom) is needed
unconditionally for:
nouveau (uses C++ in the driver)
r300 (since LLVM is always required)
radeonsi (since LLVM is always required)
swrast (if builting LLVM pipe)
and conditionally (depends whether LLVM is enabled) for
i915
r600
vmwgfx
and never needed for swrast (softpipe).
Unfortunately, automake seems to *always* link with C++ if nodist_EXTRA
is specified, even inside a false conditional. Not sure if this is a
bug, but it does seem to be weird behavior.
v2: Johannes Obermayr <johannesobermayr@gmx.de>
- Fix some undefined symbols.
v3: Johannes Obermayr <johannesobermayr@gmx.de>
- Install pipe_* to $(libdir)/gallium-pipe.
v4: Johannes Obermayr <johannesobermayr@gmx.de>
- Build it only once on --enable-gallium-gbm / --enable-opencl.
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
- Add missing Automake.inc
v3: Johannes Obermayr <johannesobermayr@gmx.de>
- Fix linking.
v4: Andreas Boll <andreas.boll.dev@gmail.com>
- Port changes from ff574d653b
gallium/egl-static: Fix unresolved symbol 'clock_gettime'
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- add missing xvmc state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing xvmc state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing xvmc state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing xvmc state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing vdpau state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing vdpau state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing vdpau state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing vdpau state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Add missing vdpau state tracker to _LIBADD variable
v3: Andreas Boll <andreas.boll.dev@gmail.com>
- Provide compatibility with scripts for the old Mesa build system
Matt Turner
Chia-I Wu
Andreas Boll
Jerome Glisse
Emil Velikov
José Fonseca
Christian König
Tom Stellard
Johannes Obermayr
Niels Ole Salscheider
Brian Paul
Rob Clark
Daniel Martin
Adam Sampson
Francisco Jerez
Lauri Kasanen
Vinson Lee
Michel Dänzer
Quentin Glidic
Maarten Lankhorst
Damien Lespiau
Marek Olšák
Alexandre Demers
Carl Worth