On Gfx4 and Gfx5, sel.l (for min) and sel.ge (for max) are implemented
using a separte cmpn and sel instruction. This lowering occurs in
fs_vistor::lower_minmax which is called very, very late... a long, long
time after the first calls to opt_cmod_propagation. As a result,
conditional modifiers can be incorrectly propagated across sel.cond on
those platforms.
No tests were affected by this change, and I find that quite shocking.
After just changing flags_written(), all of the atan tests started
failing on ILK. That required the change in cmod_propagatin (and the
addition of the prop_across_into_sel_gfx5 unit test).
Shader-db results for ILK and GM45 are below. I looked at a couple
before and after shaders... and every case that I looked at had
experienced incorrect cmod propagation. This affected a LOT of apps!
Euro Truck Simulator 2, The Talos Principle, Serious Sam 3, Sanctum 2,
Gang Beasts, and on and on... :(
I discovered this bug while working on a couple new optimization
passes. One of the passes attempts to remove condition modifiers that
are never used. The pass made no progress except on ILK and GM45.
After investigating a couple of the affected shaders, I noticed that
the code in those shaders looked wrong... investigation led to this
cause.
v2: Trivial changes in the unit tests.
v3: Fix type in comment in unit tests. Noticed by Jason and Priit.
v4: Tweak handling of BRW_OPCODE_SEL special case. Suggested by Jason.
Fixes: df1aec763e ("i965/fs: Define methods to calculate the flag subset read or written by an fs_inst.")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Dave Airlie <airlied@redhat.com>
Iron Lake
total instructions in shared programs: 8180493 -> 8181781 (0.02%)
instructions in affected programs: 541796 -> 543084 (0.24%)
helped: 28
HURT: 1158
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.35% max: 0.86% x̄: 0.53% x̃: 0.50%
HURT stats (abs) min: 1 max: 3 x̄: 1.14 x̃: 1
HURT stats (rel) min: 0.12% max: 4.00% x̄: 0.37% x̃: 0.23%
95% mean confidence interval for instructions value: 1.06 1.11
95% mean confidence interval for instructions %-change: 0.31% 0.38%
Instructions are HURT.
total cycles in shared programs: 239420470 -> 239421690 (<.01%)
cycles in affected programs: 2925992 -> 2927212 (0.04%)
helped: 49
HURT: 157
helped stats (abs) min: 2 max: 284 x̄: 62.69 x̃: 70
helped stats (rel) min: 0.04% max: 6.20% x̄: 1.68% x̃: 1.96%
HURT stats (abs) min: 2 max: 48 x̄: 27.34 x̃: 24
HURT stats (rel) min: 0.02% max: 2.91% x̄: 0.31% x̃: 0.20%
95% mean confidence interval for cycles value: -0.80 12.64
95% mean confidence interval for cycles %-change: -0.31% <.01%
Inconclusive result (value mean confidence interval includes 0).
GM45
total instructions in shared programs: 4985517 -> 4986207 (0.01%)
instructions in affected programs: 306935 -> 307625 (0.22%)
helped: 14
HURT: 625
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.35% max: 0.82% x̄: 0.52% x̃: 0.49%
HURT stats (abs) min: 1 max: 3 x̄: 1.13 x̃: 1
HURT stats (rel) min: 0.12% max: 3.90% x̄: 0.34% x̃: 0.22%
95% mean confidence interval for instructions value: 1.04 1.12
95% mean confidence interval for instructions %-change: 0.29% 0.36%
Instructions are HURT.
total cycles in shared programs: 153827268 -> 153828052 (<.01%)
cycles in affected programs: 1669290 -> 1670074 (0.05%)
helped: 24
HURT: 84
helped stats (abs) min: 2 max: 232 x̄: 64.33 x̃: 67
helped stats (rel) min: 0.04% max: 4.62% x̄: 1.60% x̃: 1.94%
HURT stats (abs) min: 2 max: 48 x̄: 27.71 x̃: 24
HURT stats (rel) min: 0.02% max: 2.66% x̄: 0.34% x̃: 0.14%
95% mean confidence interval for cycles value: -1.94 16.46
95% mean confidence interval for cycles %-change: -0.29% 0.11%
Inconclusive result (value mean confidence interval includes 0).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12191>
Performance improvement in
dEQP-VK.ssbo.phys.layout.random.16bit.scalar.13 for n=30:
release build (w/Fedora build flags): -7.79% ± 0.25%
Meson -Dbuildtype=debugoptimized: -5.10% ± 0.40%
The difference in the debugoptimized build is the calls to
inst_is_in_block(block, this) still exist on each call to remove().
v2: Only update each block's IP data once instead of once per block.
Suggested by Emma.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11632>
This involves wrapping fs_live_variables in a BRW_ANALYSIS object and
hooking it up to invalidate_analysis() so it's properly invalidated.
Seems like a lot of churn but it's fairly straightforward. The
fs_visitor invalidate_ and calculate_live_intervals() methods are no
longer necessary after this change.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4012>
Have fun reading through the whole back-end optimizer to verify
whether I've missed any dependency flags -- Or alternatively, just
trust that any mistake here will trigger an assertion failure during
analysis pass validation if it ever poses a problem for the
consistency of any of the analysis passes managed by the framework.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4012>
The invalidate_analysis() method knows what analysis passes there are
in the back-end and calls their invalidate() method to report changes
in the IR. For the moment it just calls invalidate_live_intervals()
(which will eventually be fully replaced by this function) if anything
changed.
This makes all optimization passes invalidate DEPENDENCY_EVERYTHING,
which is clearly far from ideal -- The dependency classes passed to
invalidate_analysis() will be refined in a future commit.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4012>
This fixes some validation errors generated by certain D->W conversions
but is likely not a full solution. Calculating an actual register
stride is a far more complex problem in general and should probably be
handled by the brw_fs_generator.
Reviewed-by: Matt Turner <mattst88@gmail.com>
This reverts commit 40b3abb4d1.
It is not clear that this commit was entirely correct, and unfortunately
it was pushed by error.
CC: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
This function is used in two different scenarios that for 32-bit
instructions are the same, but for 16-bit instructions are not.
One scenario is that in which we are working at a SIMD8 register
level and we need to know if a register is fully defined or written.
This is useful, for example, in the context of liveness analysis or
register allocation, where we work with units of registers.
The other scenario is that in which we want to know if an instruction
is writing a full scalar component or just some subset of it. This is
useful, for example, in the context of some optimization passes
like copy propagation.
For 32-bit instructions (or larger), a SIMD8 dispatch will always write
at least a full SIMD8 register (32B) if the write is not partial. The
function is_partial_write() checks this to determine if we have a partial
write. However, when we deal with 16-bit instructions, that logic disables
some optimizations that should be safe. For example, a SIMD8 16-bit MOV will
only update half of a SIMD register, but it is still a complete write of the
variable for a SIMD8 dispatch, so we should not prevent copy propagation in
this scenario because we don't write all 32 bytes in the SIMD register
or because the write starts at offset 16B (wehere we pack components Y or
W of 16-bit vectors).
This is a problem for SIMD8 executions (VS, TCS, TES, GS) of 16-bit
instructions, which lose a number of optimizations because of this, most
important of which is copy-propagation.
This patch splits is_partial_write() into is_partial_reg_write(), which
represents the current is_partial_write(), useful for things like
liveness analysis, and is_partial_var_write(), which considers
the dispatch size to check if we are writing a full variable (rather
than a full register) to decide if the write is partial or not, which
is what we really want in many optimization passes.
Then the patch goes on and rewrites all uses of is_partial_write() to use
one or the other version. Specifically, we use is_partial_var_write()
in the following places: copy propagation, cmod propagation, common
subexpression elimination, saturate propagation and sel peephole.
Notice that the semantics of is_partial_var_write() exactly match the
current implementation of is_partial_write() for anything that is
32-bit or larger, so no changes are expected for 32-bit instructions.
Tested against ~5000 tests involving 16-bit instructions in CTS produced
the following changes in instruction counts:
Patched | Master | % |
================================================
SIMD8 | 621,900 | 706,721 | -12.00% |
================================================
SIMD16 | 93,252 | 93,252 | 0.00% |
================================================
As expected, the change only affects SIMD8 dispatches.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
The scalar back-end uses SHADER_OPCODE_SEND for all surface messages so
we no longer need the non-logical opcodes there. Prefix them VEC4 so
it's clear that they're only used by the vec4 back-end.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The unused typed surface read/write support in the vec4 back-end has
been dropped and the fs back-end now uses SHADER_OPCODE_SEND for all
image and buffer ops. There's no reason to keep these opcodes around
anymore.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
v2: Split changes to the message type field to another patch. Suggested
by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Mostly a dummy git mv with a couple of noticable parts:
- With the earlier header cleanups, nothing in src/intel depends
files from src/mesa/drivers/dri/i965/
- Both Autoconf and Android builds are addressed. Thanks to Mauro and
Tapani for the fixups in the latter
- brw_util.[ch] is not really compiler specific, so it's moved to i965.
v2:
- move brw_eu_defines.h instead of brw_defines.h
- remove no-longer applicable includes
- add missing vulkan/ prefix in the Android build (thanks Tapani)
v3:
- don't list brw_defines.h in src/intel/Makefile.sources (Jason)
- rebase on top of the oa patches
[Emil Velikov: commit message, various small fixes througout]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
2017-03-13 11:16:34 +00:00
Renamed from src/mesa/drivers/dri/i965/brw_fs_dead_code_eliminate.cpp (Browse further)
Ian Romanick
Francisco Jerez
Jason Ekstrand
Juan A. Suarez Romero
Iago Toral Quiroga
Jason Ekstrand