Commit Graph

99 Commits

Author SHA1 Message Date
Jason Ekstrand c81ec84c1e anv/cmd_buffer: Move the clear_subpasses calls to set_subpass
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
2016-10-06 16:52:31 -07:00
Jason Ekstrand b548fdbed5 anv/cmd_buffer: Don't call set_subpass in a secondary
Initially, we had intended set_subpass to be an interesting function that
did whatever (presumably a lot) setup we needed for a subpass.  In reality,
it just sets a pointer and a dirty bit and then emits depth and stencil
state.  When we call BeginCommandBuffer on a secondary, there's no point in
setting depth and stencil state since it will already be set by the
primary.  Instead, the only thing we need to do at the start of a secondary
is set the subpass pointer and the dirty bit.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
2016-10-06 16:52:31 -07:00
Jason Ekstrand fe4e276b02 anv/cmd_buffer: Rework descriptor dirtying in set_subpass
We have a DIRTY_RENDER_TARGETS flag and that makes a lot more sense than
just dirtying fragment descriptors.  We're checking for it in some of the
gen7 code but unfortunately, nothing was setting it and it didn't do what
it was supposed to do in cmd_buffer_flush_state.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
2016-10-06 16:52:31 -07:00
Jason Ekstrand 89a96c8f43 anv/cmd_buffer: Set the L3 atomic disable mask bit in CHICKEN3 on HSW
Without this bit set, the value in "L3 Atomic Disable" won't get applied by
the hardware so we won't properly get L3 atomic caching.

Fixes dEQP-VK.spirv_assembly.instruction.compute.opatomic.compex and 198 of
the dEQP-VK.image.atomic_operations.* tests on HSW

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
2016-09-14 17:53:16 -07:00
Jason Ekstrand 7e891f90c7 anv: Move cmd_buffer_config_l3 into anv_cmd_buffer.c
This is the only remaining part of genX_l3.c and there's really no good
reason for it to be in its own file.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-09-03 08:23:07 -07:00
Jason Ekstrand 17968e2dfd anv/cmd_buffer: Move emit_lri and emit_lrm higher up
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-09-03 08:23:07 -07:00
Jason Ekstrand b9e99282a6 anv: Add a stub for CmdCopyQueryPoolResults on Ivy Bridge
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
2016-07-13 20:31:27 -07:00
Jason Ekstrand 0bd3a7e931 isl: Change the physical size of a W-tile to 128x32
Reviewed-by: Chad Versace <chad.versace@intel.com>
2016-07-13 11:47:37 -07:00
Jason Ekstrand ac7eeebce4 anv/dump: Add support for dumping framebuffers
Reviewed-by: Chad Versace <chad.versace@intel.com>
2016-07-09 20:58:33 -07:00
Jason Ekstrand c2f2c8e407 anv: Use different BOs for different scratch sizes and stages
This solves a race condition where we can end up having different stages
stomp on each other because they're all trying to scratch in the same BO
but they have different views of its layout.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
2016-06-22 12:39:45 -07:00
Jason Ekstrand 35b53c8d47 anv/cmd: Dirty descriptor sets when a new pipeline is bound
Ever since c2581a9375, the binding table layout has depended on the
pipeline.  This means that whenever we change pipelines we also need to
re-emit binding tables for the new layout.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
2016-06-21 16:45:25 -07:00
Jason Ekstrand 2bfe0c3374 anv/cmd: Move emit_descriptor_pointers to genX_cmd_buffer.c
It's tiny and fully generic so there's really no reason for it to be in a
gen7-specific file.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
2016-06-21 16:45:25 -07:00
Jason Ekstrand 9df4d6bb36 anv/cmd: Move flush_descriptor_sets to anv_cmd_buffer.c
There's no good reason for recompiling it

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
2016-06-21 16:45:25 -07:00
Jason Ekstrand eb6764c4a7 anv: Add proper support for depth clamping
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
2016-06-20 12:04:08 -07:00
Jason Ekstrand 8a46b505cb anv/cmd_buffer: Split emit_viewport in two
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
2016-06-20 12:03:09 -07:00
Jason Ekstrand 20e95a746d anv/cmd_buffer: Set depth/stencil extent based on the image
It used to be based on the framebuffer which isn't quite right.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
2016-06-20 12:03:05 -07:00
Jordan Justen 1b79e7ebbd i965: Store number of threads in brw_cs_prog_data
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
2016-06-01 19:29:02 -07:00
Jason Ekstrand fb2a5ceb32 anv: Emit DRAWING_RECTANGLE once at driver initialization
Also, we don't actually need it for clipping because meta always colors
inside the lines and, for all other operations, the user is required to set
a scissor.  Since DRAWING_RECTANGLE stalls the GPU, we want to emit it as
little as possible.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-05-27 15:18:11 -07:00
Jason Ekstrand 3a83c176ea anv/cmd_buffer: Only emit PIPE_CONTROL on-demand
This is in contrast to emitting it directly in vkCmdPipelineBarrier.  This
has a couple of advantages.  First, it means that no matter how many
vkCmdPipelineBarrier calls the application strings together it gets one or
two PIPE_CONTROLs.  Second, it allow us to better track when we need to do
stalls because we can flag when a flush has happened and we need a stall.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-05-27 15:18:09 -07:00
Jason Ekstrand b26bd6790d anv/clear: Only clear the render area when doing subpass clears
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-05-27 15:18:04 -07:00
Jason Ekstrand 5432487792 anv: Move push constant allocation to the command buffer
Instead of blasting it out as part of the pipeline, we put it in the
command buffer and only blast it out when it's really needed.  Since the
PUSH_CONSTANT_ALLOC commands aren't pipelined, they immediately cause a
stall which we would like to avoid.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-05-27 15:17:43 -07:00
Jordan Justen 6c9f35bb73 Revert "HACK: Don't re-configure L3$ in render stages pre-BDW"
This reverts commit 41af9b2e51.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94468
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
2016-05-17 13:04:03 -07:00
Jordan Justen 8a80af2820 anv: Port L3 cache programming from i965
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
2016-05-17 13:04:03 -07:00
Jason Ekstrand 234ecf26c6 anv/image: Add an aspects field
This makes several checks easier and allows us to avoid calling
anv_format_for_vk_format in a number of cases.
2016-05-17 12:17:22 -07:00
Jason Ekstrand 50018522d2 anv: s/anv_batch_emit_blk/anv_batch_emit/
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2016-04-20 14:54:09 -07:00
Jason Ekstrand 8a6ced83e9 anv/cmd_buffer: Use the new emit macro for quaries
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2016-04-20 14:54:09 -07:00
Jason Ekstrand db25e1eec5 anv/cmd_buffer: Use the new emit macro for DRAWING_RECTANGLE
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2016-04-20 14:54:09 -07:00
Jason Ekstrand deb13870d8 anv/cmd_buffer: Use the new emit macro for compute shader dispatch
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2016-04-20 14:54:09 -07:00
Jason Ekstrand 06fc7fa684 anv/cmd_buffer: Use the new emit macro for 3DSTATE_CONSTANT
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2016-04-20 14:54:09 -07:00
Jason Ekstrand a71ded0e18 anv/cmd_buffer: Use the new emit macro for DEPTH/STENCIL_BUFFER
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2016-04-20 14:54:09 -07:00
Jason Ekstrand 56453eeaff anv/cmd_buffer: Use the new emit macro for PIPE_CONTROL and STATE_BASE_ADDRESS
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2016-04-20 14:54:09 -07:00
Jason Ekstrand 1d4d6852b4 anv/cmd_buffer: Use the new emit macro for 3DPRIMITIVE commands
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2016-04-20 14:54:09 -07:00
Jordan Justen f56f538ce4 anv/gen7: Fix command parser version test with indirect dispatch
Caught-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
2016-03-28 22:30:33 -07:00
Jordan Justen 8dbfa265a4 anv/gen7: DispatchIndirect requires cmd parser 5
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
2016-03-28 17:01:35 -07:00
Jordan Justen b83785d86d anv/gen7: Add stall and flushes before switching pipelines
This is a port of 18c76551ee from OpenGL
to Vulkan.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
2016-03-12 13:13:37 -08:00
Jordan Justen c8ec65a1f5 anv: Add flush_pipeline_before_pipeline_select
flush_pipeline_before_pipeline_select adds workarounds required before
switching the pipeline.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
2016-03-12 13:13:37 -08:00
Jordan Justen 1b126305de anv/genX: Add flush_pipeline_select_gpgpu
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
2016-03-12 12:43:46 -08:00
Jason Ekstrand 41af9b2e51 HACK: Don't re-configure L3$ in render stages pre-BDW
This fixes a "regression" on Haswell and prior caused by merging the gen7
and gen8 flush_state functions.  Haswell should still work just fine if
you're on a 4.4 kernel, but we really should make it detect the command
parser version and do something intelligent.
2016-03-12 08:57:16 -08:00
Jason Ekstrand 248ab61740 anv/cmd_buffer: Pull the core of flush_state into genX_cmd_buffer 2016-03-08 17:10:05 -08:00
Jason Ekstrand 21ee5fd326 anv: Emit null render targets
v2 (Francisco Jerez): Add the state_offset to the surface state offset
2016-03-05 20:47:10 -08:00
Kristian Høgsberg Kristensen 2b29342fae anv: Store prog data in pipeline cache stream
We have to keep it there for the cache to work, so let's not have an
extra copy in struct anv_pipeline too.
2016-03-05 13:50:07 -08:00
Jason Ekstrand 7c1660aa14 anv: Don't allow D16_UNORM to be combined with stencil
Among other things, this can cause the depth or stencil test to spurriously
fail when the fragment shader uses discard.
2016-03-05 09:59:28 -08:00
Jordan Justen 81f30e2f50 anv/hsw: Move query code to genX file for Haswell
This fixes many CTS cases, but will require an update to the kernel
command parser register whitelist. (The CS GPRs and TIMESTAMP
registers need to be whitelisted.)

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
2016-03-05 01:08:07 -08:00
Kenneth Graunke 3ed260f54c hack to make dota 2 menus work 2016-03-03 16:21:09 -08:00
Jordan Justen 98cdce1ce4 anv/gen7: Use predicated rendering for indirect compute
For OpenGL, see commit 9a939ebb47.

Fixes:
 * dEQP-VK.compute.indirect_dispatch.upload_buffer.empty_command
 * dEQP-VK.compute.indirect_dispatch.gen_in_compute.empty_command

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
2016-03-02 12:03:05 -08:00
Jordan Justen da4745104c anv: Save batch to local variable for indirect compute
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
2016-03-02 12:03:05 -08:00
Kristian Høgsberg Kristensen 22d8666d74 anv: Add in image->offset when setting up depth buffer
Fix from Neil Roberts.

https://bugs.freedesktop.org/show_bug.cgi?id=94348
2016-03-01 09:19:39 -08:00
Jason Ekstrand 371b4a5b33 anv: Switch over to the macros in genxml 2016-02-20 09:09:28 -08:00
Jason Ekstrand 9851c8285f Move the intel vulkan driver to src/intel/vulkan 2016-02-18 10:37:59 -08:00
Renamed from src/vulkan/genX_cmd_buffer.c (Browse further)