Split up the "Environment Variables" section into "Compiler Options"
and "Compiler Specification". I think this makes the information
easier to find and understand.
Add new Introduction and Advanced Usage sections.
Spell out a few more details, like "ninja install".
Improve the layout around example commands.
Fix grammatical errors and tighten up the text.
Explain the --prefix option.
v2: Remove language about 'ninja clean' and move link to Meson
information about separate build directories earlier in the page.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Mention the tick-box otherwise only the MR author can rebase the series.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reivewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 190a79f462710f04d67eaefe498ef6ae5b7f5b1a)
[Emil: drop VERSION hunk]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
VERSION
Thanks to Yann Kervran for the report and suggestions.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Sending MRs from the main Mesa repository increase clutter in the
repository, and decrease visibility of project-wide branches. So it's
better if MRs are sent from forks instead.
Let's add a note about this, in case its not obvious to everyone.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Both the Intel and RADV people have been really bad about adding things
to the release notes. We should start actually paying attention.
Acked-by: Tapani Pälli <tapani.palli@intel.com>
As suggested by Emil Velikov.
Cc: Dylan Baker <dylan.c.baker@intel.com>
Cc: Juan A. Suarez <jasuarez@igalia.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Now that we have software implementations of ARB_gpu_shader_int64 and
ARB_gpu_shader_fp64 we can unconditionally enable these extensions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: replace incorrect "<td/>" with "<td>" (Eric).
Cc: Dylan Baker <dylan.c.baker@intel.com>
Cc: Juan A. Suarez <jasuarez@igalia.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Juan A. Suarez <jasuarez@igalia.com>
Hopefully we can kick start the revolution and other distros will start
providing them as well :)
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
`gcc-ar` is preferred over the generic `ar`, and the `arm` family is
for 32-bit ARM [1].
[1] https://mesonbuild.com/Reference-tables.html#cpu-families
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
I know it's not what anyone wants, but how about we start with a
message in the documentation that encourages people to try meson.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Engeström <eric@engestrom.ch>
Note that meson requires python 3, scons requires python 2, and
autotools works with either.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Engeström <eric@engestrom.ch>
So that gitlab will render the < and > correctly allowing the tag to be
copy-n-pasted without additional formatting.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Because of the many caveats involved, using -Dc_args instead of CFLAGS
is recommended both by meson upstream and by us.
v2: - Fix typo
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> (v1)
Reviewed-by: Eric Anholt <eric@anholt.net>
Across several projects I've seen new contributors say "I wasn't sure if I
should provide a review tag since I'm not really an expert in this area."
Everyone I know already applies some implicit weighting to reviews from
different people, so encourage participation.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Note that we have an official GL extension number, pick the appropriate
section of the GLX spec to modify, and add changelog.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This has not even had an attempt at implementation. If you asked for
renderer 0 - which, the spec implies, should always work - then
dri2_convert_glx_attribs would fail, we'd silently fall back to creating
an indirect context, and xserver would also not recognize the attribute
and would throw BadValue at you.
The API would be difficult to use in any case, since there's no way to
enumerate how many renderers the screen has. I'd be tempted to add that
by defining:
glXQueryRendererIntegerMESA(dpy, screen,
/* renderer = */ -1,
0, &value);
to return the number of renderers, but a new entrypoint might be
cleaner. Still, better to not specify it at all than to lie about it.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
In one place we say, if GLES isn't supported then the profile version
will be 0.0. Then later we say, if the GLES profile extension isn't
supported then GLX_RENDERER_OPENGL_ES_PROFILE_VERSION_MESA is not
mentioned in the spec. A strict reading of the latter would mean that
GLX_RENDERER_OPENGL_ES_PROFILE_VERSION_MESA is not a recognized token,
and the query should instead return False.
The implementation does not check for the GLES profile extensions, and
the additional complexity doesn't seem worth it. Removing the
interaction text makes the spec match the implementation.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This documents a process for using GitLab Merge Requests as an second
way to submit code changes for Mesa. Only one of the two methods is
allowed for each patch series.
We will *not* require all patches to be emailed. Some code changes may
be reviewed and merged without any discussion on the mesa-dev email
list.
v2:
* No longer require email. Allow submitter to choose email or a
GitLab merge request.
* Various feedback from Brian, Daniel, Dylan, Eric, Erik, Jason,
Matt, Michel and Rob.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Rob Clark <robdclark@gmail.com>
As 18.3 was published with some delay, let's extend 18.2 life for
another extra release.
CC: Andres Gomez <agomez@igalia.com>
CC: Dylan Baker <dylan@pnwbakers.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
The spec was modified to support GLES. Tested by piglit.
v2: rebase
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu> (v1)
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
For format fallbacks like ETC and ASTC, switching between sRGB and linear
decoding is undefined, or at least is not bit-exact. Same as
EXT_texture_sRGB_decode on GLES.
There are no piglit or dEQP regresssions.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This extension is not properly tested (testing for
GL_ARB_fragment_shader_interlock is not sufficient), and since this was
noted in review on August 28th no tests have been sent.
Revert "i965: Add INTEL_fragment_shader_ordering support."
Revert "mesa: Add GL/GLSL plumbing for INTEL_fragment_shader_ordering"
This reverts commit 03ecec9ed2.
This reverts commit 119435c877.
Cc: mesa-stable@lists.freedesktop.org
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Anholt <eric@anholt.net>
A while back we agreed that having a live/staging branch is beneficial.
Sadly we forgot to document that, so here is my first attempt.
Document the caveat that the branch history is not stable.
CC: Andres Gomez <agomez@igalia.com>
CC: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reword slightly and highlight the important parts of the text.
CC: Andres Gomez <agomez@igalia.com>
CC: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
The device extension string is expected to contain the name of the
extension defining what kind of device it is, so the caller can know
what kinds of operations it can perform with it. So that string had
better be non-empty, hence this trivial extension.
v2:
- drop "fallback", update history and update contributor list
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Emil will be helping out with 18.3, while Juan finalises 18.2
v2: [Emil] add Emil for 18.3, fix typos
CC: Emil Velikov <emil.velikov@collabora.com>
CC: Juan A. Romero Suarez <jasuarez@igalia.com>
Cc: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
I'll take care of 18.2 releases series on Andres behalf.
CC: Andres Gomez <agomez@igalia.com>
CC: Dylan Baker <dylan@pnwbakers.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
Fixes: 86b4bd52dc ("docs: update calendar, add news item and link
release notes for 18.2.3")
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
`git-branch` doesn't exist, and mesa3d-dev hasn't been used in a great
many years :)
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
I also updated the developer instructions; presumably someone who's been
given commit rights already knows how to clone a repository :)
A more useful thing is to show how to update the pushurl, and how to use
access tokens to push over HTTPS (especially for us at Intel, where
non-http traffic is a pain).
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
It's just over 10 months since 17.3.0 was released with s3tc support enabled.
Probably a good idea to update the FAQ page.
v2: Incorporate feedback from Adam Jackson <ajax@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Fixes: 04396a134f ("mesa: Import libtxc_dxtn sources")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
v2: - fix typo
These are how FreeBSD and Debian handle multiple versions of LLVM
installed at the same time, respectively.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Due to having 2 additional RCs for 18.2.
Cc: Dylan Baker <dylan.c.baker@intel.com>
Cc: Juan A. Suarez <jasuarez@igalia.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Juan A. Suarez <jasuarez@igalia.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Adds suppport for INTEL_fragment_shader_ordering. We achieve
the fragment ordering by using the same instruction as for
beginInvocationInterlockARB() which is by issuing a memory
fence via sendc.
Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
because the closed driver exposes it.
It's equivalent to ARB_gpu_shader_int64.
In this patch, I did everything the same as we do for ARB_gpu_shader_int64.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The requirement was bumped a while back, but we forgot to update the
docs.
Fixes: ed871af91c ("configure.ac: raise Mako required version to
0.8.0")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Currently we use AC_CHECK_PROGS looking for python2.7, python2 and
finally python. That is due to the varying names used across the
different OS.
Use the handy AM_PATH_PYTHON which finds the correct name and checks for
the version.
Note: python2.7 has been an unofficial requirement for quite some time.
Update the docs to reflect that.
Cc: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
v2: Describe interactions with the capabilities added by
SPV_INTEL_shader_atomic_float_minmax
v3: Remove 64-bit float support.
v4: Explain NaN issues. Explain issues with atomicMin(-0, +0) and
atomicMax(-0, +0).
v5: Fix whitespace issues noticed by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
We need to handle the gaps in the streamout bindings on the guest
side and enable if it the host has the rest enabled.
Reviewed-by: Jakob Bornecrantz <jakob@collabora.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Driver and application can put their drirc files in
${datadir}/drirc.d/ with name xxx.conf. Config files
will be read and applied in file name alphabetic order.
So there are three places for drirc listed in order:
1. /usr/share/drirc.d/
2. /etc/drirc
3. ~/.drirc
v4:
fix meson build
v3:
1. seperate driParseConfigFiles refine into another patch
2. fix entries[i] mem leak
v2:
drop /etc/drirc.d
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Emil Velikov
Brian Paul
Albert Pal
Dylan Baker
Dave Airlie
Eric Engestrom
Bas Nieuwenhuizen
Jason Ekstrand
Gurchetan Singh
Emmanuel Gil Peyrot
Veluri Mithun
Erik Faye-Lund
Emil Velikov
Andres Gomez
Matt Turner
Juan A. Suarez Romero
Ilia Mirkin
Eric Anholt
Adam Jackson
Jordan Justen
Dieter Nützel
Marek Olšák
Stuart Young
Jose Fonseca
Kevin Rogovin
Rhys Perry
Kevin Rogovin
Ian Romanick
Timothy Arceri
Qiang Yu