Add OpenGL and Vulkan testing for V3D and V3DV respectively.
Add also a couple of manual piglit jobs for V3D.
v2:
- Replace custom mustpass with running fraction of tests (Eric)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8745>
We were using surfaceless, which misses out on some useful coverage we'd
like to have in the GLX/EGL piglit tests, but more importantly prevented
many traces from running.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8727>
This tests OpenGL ES 2.0 CTS suite with VC4 drivers, through baremetal
Raspberry Pi 3 devices.
The devices are connected to a switch that supports Power over Ethernet
(PoE), so the devices can be started/stopped through the switch, and
also to a host that runs the GitLab runner through serial-to-USB cables,
to monitor the devices to know when the testing finishes.
The Raspberries uses a network boot, using NFS and TFTP. For the root
filesystem, they use the one created in the armhf container. For the
kernel/modules case, this is handled externally. Currently it is using
the same kernel/modules that come with the Raspberry Pi OS. In future we
could build them in the same armhf container.
At this moment we only test armhf architecture, as this is the default
one suggested by the Raspberry Pi Foundation. In future we could also
add testing for arm64 architecture.
Finally, for the very rare ocassions where the Raspberry Pi 3 device is
booted but no data is received, it retries the testing for a second
time, powering off and on the device in the process.
v2:
- Remove commit that exists capture devcoredump (Eric)
- Squash remaining commits in one (Andres)
v3:
- Add missing boot timeout check (Juan)
v4:
- Use locks when running the PoE on/off script (Eric)
- Use a timeout for serial read (Eric)
v5:
- Rename stage to "raspberrypi" (Eric)
- Bump up arm64_test tag (Eric)
v6:
- Make serial buffer timeout optional (Juan)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7628>
As drivers have been tested with more and more traces, the yml file is
becoming a bit unwieldy. As more drivers are going to be tested with
traces, and more traces will be used, split them in per-driver files so
the size stays manageable.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Reviewed-By: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6185>
Connor recently ran into an issue where the chezas were hanging where his
GPUs weren't, and was blocked on getting some feedback on what was
happening. A devcoredump will help non-cheza-having devs debug (or
hopefully with other intermittent fails).
Closes: #3187
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6036>
When the lava files were moved out of the container, this stopped
working which caused the traces job for Freedreno to not run any traces
at all.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Fixes: dcd171f5e9 ("gitlab-ci: More stable URL for kernel and ramdisk artifacts, for LAVA")
Acked-by: Andres Gomez <agomez@igalia.com>
Acked-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6021>
We don't want these files shared between builds (it'll get blown away by
the next rsync), and NFS will just increase our latency for hitting the
cache.
Drops a630 gles31 run from 11-17 minutes to 5.5. Maximum cache size on a
run I've seen is 153M, which it seems we can easily spare.
Fixes: f97acb4bb4 ("freedreno/ir3: disk-cache support")
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5998>
Like for LAVA, make the tradeoff of moving the test scripts and data (55k)
into the artifacts in order to make the per-build jobs not have to pull
down the git tree (hundreds of MB when you don't hit a cached container
for your specific user, which I see happen multiple times a day in my CI
runs).
To do this, we have to be a bit more careful in some places about our
working directory potentially being dirty.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5393>
We've already uploaded and downloaded them from fd.o and put them in the
rootfs, so we can clean up the extra prep work.
Our test job now extends from .test so that the artifacts' install dir
with all the scripts is extracted. This required moving the dependency on
meson-testing to the x86 test-gl/test-vk job blocks.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5393>
It's easy to get something wrong in the driver build or container or
something that results in falling back to swrast, and then your only clue
was runtime and how your failure cases suspiciously match a swrast
driver's.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
We always want to see status updates happening in the logs, otherwise it
can like maybe your machine hung until the run actually completes.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
There's some files from the .gitlab-ci directory that are needed in the
test stage and that, because the Mesa repository isn't checked out in
that stage, need to be made available through other means.
Because those files are going to be needed in LAVA devices, place them
ino the tarball containing the built files so it's available to both
gitlab-ci runners and LAVA devices.
Before those files were passed in the artifacts of the Gitlab CI job,
but this commit places them into the built tarball so scripts later in
the pipeline don't need to account for this discrepancy.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
Following on from the db410c conversion to baremetal testing, reuse the
same scripts in the same rack to run 7 db820c boards (#4/8 is failing in
the bootloader for unknown reasons).
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4177>
This supports powering up the device (using an external tool you
provide based on your particular lab), talking over serial to wait for
the fastboot prompt, and then booting a fastboot image on a target
device.
I was previously relying on LAVA for this, but that ran afoul of
corporate policies related to the AGPL. However, LAVA wasn't doing
too much for us, given that gitlab already has a job scheduler and
tagging and runners. We were spending a lot of engineering on making
the two systems match up, when we can just have gitlab do it directly.
Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>