this avoids looking at irrelevant 3d pixelstore params like
GL_PACK_IMAGE_HEIGHT when they don't apply, which will cause the storage
buffer to be incorrectly sized and break the operation
Fixes: e7b9561959 ("gallium: implement compute pbo download")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16728>
Since we're now actually running Vulkan tests on Dozen, the comment
was wrong and we actually want the runtime. The referenced issue
has been fixed anyway.
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16756>
Instead of SDWA v_mov_b32/v_xor_b32, we can use a combination of
v_add_u16/v_sub_u16 (add/sub swap, similar to xor swap) and v_perm_b32
with a literal.
I don't know yet if GFX11 adds any new instructions which makes this
easier, but this approach should have full functionality.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16595>
I think v_mov_b32 was only used because a sub-dword p_parallelcopy
couldn't take constants on some gfx levels. That shouldn't be the case
anymore.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16595>
Blending configuration needs to be adapted in case the RT format does
not have an alpha channel. This is handled so far correctly.
But when we have two RT, one with alpha and other without it, we need
to split the blend configuration, so one is adapted and the other not.
Otherwise we would be changing the blend config for the wrong RT.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16747>
this is uses the 1.1 features, not 1.3
also check the shader stages available since the GL extension requires
all of them
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16757>
During certain control-flow manipulation passes, we go out-of-SSA
temporarily in certain areas of the code to make control-flow
manipulation easier. This can result in registers being in phi sources
temporarily. If two sub-passes run before we get a chance to do
clean-up, we can end up doing some out-of-SSA and then a bit more
out-of-SSA and trigger this case. It's easy enough to handle.
Fixes: a620f66872 ("nir: Add a couple quick-and-dirty out-of-SSA helpers")
Fixes: 79a987ad2a ("nir/opt_if: also merge break statements with ones after the branch")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6370
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16111>
This isn't really necessary because the API doesn't allow MSAA and
mipmapping at the same time but people forget that pretty often so it's
good to have it as documentation if nothing else.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14129>
GLSL says that indexing in a samplers array should be done with
a dynamically uniform value.
If the app doesn't obey this constraint, it'll get incorrect
results.
But there's one case where the app might be correct and yet
get incorrect result: if 2 consecutive draws are used, with no
state changes in between, the hardware might run them in the
same wave and the app will get incorrect result as-if it was
using non-dynamically uniform index.
To prevent this, this commit takes advantage of the divergence
analysis pass - if the index is marked as divergent, then it will
have the same effect as using ACCESS_NON_UNIFORM in SPIR-V.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16709>
Commit d1ff453a added this alignment in the wrong spot - it needs to
happen after RA because spilling can increment this 32 bits at a time.
Also assert that we align this correctly now.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16596>
For the sake of consistency, do not rely on a 1-dimensional
workgroup ID anymore.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16721>
Unfortunately, radv_lower_multiview is not suitable for mesh shaders
because it can't know the mapping between API mesh shader
invocations and output primitives.
Additionally, when lowering view id to layer, it must be created
as a per-primitive PS input.
Fixes: d32656bc65
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16504>
With the kernel uprev we are no longer affected by the kernel
regression that was causing issues.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16641>
This new test reports a failure and started to run during the time
piglit runs were temporarily disabled.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16641>
In addition to pushing it to the current latest stable, the v5.17 kernel
for mesa CI pulls a patch to address a regression in drm that affects at
least the lima jobs.
The dtb for sc7180-trogdor-lazor-limozeen-nots is also updated since the
old one no longer exists in v5.17.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16641>
Until know when we consumed a barrier we would implement it by
setting the serialize flag on a job, which would cause it to
be serialized across all hardware queues (CL, CSD, TFU). However,
now that we track the source(s) of the barrier, we can restrict this
to only the relevant queue(s) instead (multisync path only).
It should be noted that we can implement transfers via TFU or CL
jobs, so if the source of a barrier is a transfer, we currently
synchronize against both the TFU and the CL queues, however, we
may be able to more effectively track this in the future to
restrict this to just one of the queues.
Also, for secondary command buffers we are taking the easy way
out and always synchronize against all queues, but we should
be able to do the same for secondaries without too much effort.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16743>
Until now we have been tracking the dstStageMask of barriers (where they
are consumed) but not where they are produced (the srcStageMask). With
this change we extend our barrier state to keep track of this as well.
This allows the driver to have better knowledge of the intended barrier
semantics so it can limit the amount of synchronization it does only
to the source stages involved with a barrier. We will do this in a
later patch.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16743>
Mike Blumenkrantz
Jesse Natalie
Rhys Perry
Juan A. Suarez Romero
Jason Ekstrand
Jason Ekstrand
Pierre-Eric Pelloux-Prayer
Karol Herbst
M Henning
Timur Kristóf
Erico Nunes
Iago Toral Quiroga