This causes dEQP-VK.api.copy_and_blit.resolve_image.partial.* to start
failing due to test bugs. See CL 1031 for a test fix.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Now that the state stream is allocating off of the state pool, there's
no reason why we need the block pool to be separate.
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
The description under RENDER_SURFACE_STATE::RedClearColor says,
For Sampling Engine Multisampled Surfaces and Render Targets:
Specifies the clear value for the red channel.
For Other Surfaces:
This field is ignored.
This means that the sampler on BDW doesn't support CCS.
Cc: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
We're about to start requiring it in yet another case and calculating
exactly when one is needed is starting to get prohibitively expensive.
A single surface state doesn't take up that much space so we may as well
create one all the time.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
While having the _3d and _gpgpu versions is nice, there's no reason why
we need to have duplicated logic for tracking the current pipeline.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
The programming note that says we need to do this still exists in the
SkyLake PRM and, from looking at the bspec, seems like it may apply to
all hardware generations SNB+. Unfortunately, this isn't particularly
clear cut since there is also language in the bspec that says you can
skip the flushing and stall to get better throughput. Experimentation
with the "Car Chase" benchmark in GL seems to indicate that some form of
flushing is still needed. This commit makes us do the full set of
flushes regardless of hardware generation. We can always reduce the
flushing later.
Reported-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: "17.0 13.0" <mesa-stable@lists.freedesktop.org>
A bunch of code was indented in such a way that it looked like it went
with the if statement above but it definitely didn't.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: "17.0 13.0" <mesa-stable@lists.freedesktop.org>
This fixes rendering issues in the Vulkan port of skia on some hardware.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
A resolve is not needed on Skylake in this case. We were forcing
a resolve because we set the input_aux_usage to ISL_AUX_USAGE_NONE.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
These can fail to allocate device memory, however, the driver can recover
from this error by allocating a new binding table block and trying again.
v2:
- Instead of tracking the errors in these functions and making callers
reset the batch's status before attempting to allocate a new block
for the binding table, simply make callers responsible for setting
the error status if they fail to allocate memory during the second
attempt (Jason).
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Also, we had a couple of instances in flush_descriptor_sets() were
we were returning a VkResult directly upon error, but the return
value of this function is not a VkResult but a uint32_t dirty mask,
so simply return 0 in these cases which reduces the amount of
work the driver will do after the error has been raised.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
v2: Assert on secondary commands, applications should've called
vkEndCommandBuffer() and received an error for them before (Jason)
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Growing the reloc list happens through calling anv_reloc_list_add() or
anv_reloc_list_append(). Make sure that we call these through helpers
that check the result and set the batch error status if needed.
v2:
- Handling the crashes is not good enough, we need to keep track of
the error, for that, keep track of the errors in the batch instead (Jason).
- Make reloc list growth go through helpers so we can have a central
place where we can do error tracking (Jason).
v3:
- Callers that need the offset returned by anv_reloc_list_add() can
compute it themselves since it is extracted from the inputs to the
function, so change the function to return a VkResult, make
anv_batch_emit_reloc() also return a VkResult and let their callers
do the error management (Topi)
v4:
- Let anv_batch_emit_reloc() return an uint64_t as it originally did,
there is no real benefit in having it return a VkResult.
- Do not add an is_aux parameter to add_surface_state_reloc(), instead
do error checking for aux in add_image_view_relocs() separately.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
We have a performance problem with dynamic buffer descriptors. Because
we are currently implementing them by pushing an offset into the shader
and adding that offset onto the already existing offset for the UBO/SSBO
operation, all UBO/SSBO operations on dynamic descriptors are indirect.
The back-end compiler implements indirect pull constant loads using what
basically amounts to a texelFetch instruction. For pull constant loads
with constant offsets, however, we use an oword block read message which
goes through the constant cache and reads a whole cache line at a time.
Because of these two things, direct pull constant loads are much faster
than indirect pull constant loads. Because all loads from dynamically
bound buffers are indirect, the user takes a substantial performance
penalty when using this "performance" feature.
There are two potential solutions I have seen for this problem. The
alternate solution is to continue pushing offsets into the shader but
wire things up in the back-end compiler so that we use the oword block
read messages anyway. The only reason we can do this because we know a
priori that the dynamic offsets are uniform and 16-byte aligned.
Unfortunately, thanks to the 16-byte alignment requirement of the oword
messages, we can't do some general "if the indirect offset is uniform,
use an oword message" sort of thing.
This solution, however, is recommended for a few of reasons:
1. Surface states are relatively cheap. We've been using on-the-fly
surface state setup for some time in GL and it works well. Also,
dynamic offsets with on-the-fly surface state should still be
cheaper than allocating new descriptor sets every time you want to
change a buffer offset which is really the only requirement of the
dynamic offsets feature.
2. This requires substantially less compiler plumbing. Not only can we
delete the entire apply_dynamic_offsets pass but we can also avoid
having to add architecture for passing dynamic offsets to the back-
end compiler in such a way that it can continue using oword messages.
3. We get robust buffer access range-checking for free. Because the
offset and range are baked into the surface state, we no longer need
to pass ranges around and do bounds-checking in the shader.
4. Once we finally get UBO pushing implemented, it will be much easier
to handle pushing chunks of dynamic descriptors if the compiler
remains blissfully unaware of dynamic descriptors.
This commit improves performance of The Talos Principle on ULTRA
settings by around 50% and brings it nicely into line with OpenGL
performance.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This should let Dota 2 run on debug builds though it will spew errors
like mad. Hopefully, Valve will get this fixed sooner rather than
later.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This is needed to transition input attachments.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We will be using the image layout. Store the full struct directly from
the user.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Due to recent commits, the sampler now bypasses the auxiliary HiZ buffer
when reading from a depth image subresource that is in the general
layout. Remove this unneeded resolve.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Validate the inputs, verify that this image has a depth
buffer, use gen_device_info instead of
v2:
- Add parenthesis (Jason Ekstrand)
- Make parameters const
- Use gen_device_info instead of gen
- Pass aspect to missed function in transition_depth_buffer
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
According to the PRM description of the Depth field:
"This field specifies the total number of levels for a volume texture
or the number of array elements allowed to be accessed starting at the
Minimum Array Element for arrayed surfaces"
However, ISL defines array_len as the length of the range
[base_array_layer, base_array_layer + array_len], so it already represents
a value relative to the base array layer like the hardware expects.
v2: Depth is defined as a U11-1 field, so subtract 1 from
the actual value (Jason)
This fixes a number of new CTS tests that would crash otherwise:
dEQP-VK.pipeline.render_to_image.*
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This just enables basic MSAA compression (no fast clears) for all
multisampled surfaces. This improves the framerate of the Sascha
"multisampling" demo by 76% on my Sky Lake laptop. Running Talos on
medium settings with 8x MSAA, this improves the framerate in the
benchmark by 80%.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This allows the helper to check for llc instead of having to do it
manually at all the call sites.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
It's a bit shorter and easier to work with. Also, we're about to add a
helper called clflush which does the clflush but without any memory
fencing.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This fixes a some rendering corruption in The Talos Principle
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
This helps Dota 2 on Broadwell by 8-9%. I also hacked up the driver and
used the Sascha "shadowmapping" demo to get some results. Setting
uses_kill to true dropped the framerate on the demo by 25-30%. Enabling
the PMA fix brought it back up to around 90% of the original framerate.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This allows shaders to write to storage images declared with unknown
format if they are decorated with NonReadable ("writeonly" in GLSL).
Previously an image view would always use a lowered format for its
surface state, however when a shader declares a write-only image, we
should use the real format. Since we don't know at view creation time
whether it will be used with only write-only images in shaders, create
two surface states using both the original format and the lowered
format. When emitting the binding table, choose between the states
based on whether the image is declared write-only in the shader.
Tested on both Sascha Willems' computeshader sample (with the original
shaders and ones modified to declare images writeonly and omit their
format qualifiers) and on our own shaders for which we need support
for this.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Compressing a render target and decompressing it in the same
single-subpass render pass may waste bandwidth. While this may be
beneficial in some circumstances, it does not help in all. Reclaims
about 1.95% FPS for Dota 2 on some configurations.
v2 (Jason Ekstrand):
- Provide a more thorough comment
- Enable CCS_D for input attachments
v3 (Jason Ekstrand):
- Provide performance numbers
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The term "lossless compression" could potentially mean multisample
color compression, single-sample color compression or HiZ because they
are all lossless. The term CCS_E, however, has a very precise meaning;
in ISL and is only used to refer to single-sample color compression.
It's also much shorter which is nice.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
v2: use define for buffer ID (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>