v2:
- Bump up MESA_ROOTFS_TAG instead of arm_build (Michel)
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10136>
So far we were using a telnet-based script to communicate with the PoE
Switch to turn on/off the network ports the DUTs are connected.
But this script does not seem very reliable because from time to time the
switch fails to execute the steps in the script.
As the PoE Switch we use is a smart one with support for SNMP protocol,
it would be easier to use it to handle it, which allows to turn on/off
the ports without going through the nasty telnet steps
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9954>
libpciaccess-dev:$arch from STABLE_EPHEMERAL down to the main list of packages
in .gitlab-ci/container/cross_build.sh, and bumping the arm_build, i386_build,
ppc64el_build & s390x_build tags again.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
----
.gitlab-ci.yml | 8 ++++----
.gitlab-ci/container/cross_build.sh | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10095>
This allows to fix some credential leaks and provides compatibility with
the latest LAVA version.
Avoids failures when the LAVA instance returns Error 500
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9851>
After a recent LAVA update, failures in running a test would cause the
whole test to be retried. We only want for the boot to be retried (in
case of infrastructuer errors), so set the nr of retries for tests to 1.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9950>
The test timeout shouldn't be bigger than the whole job's timeout.
Also, reduce the timeouts to a more sane level and remove timeouts that
don't bring value.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9950>
Works around the other Missing case we've seen in CI, possibly fixes the
underlying issue, and adds support for comments in xfails lists.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9806>
The merged image contains kernels & rootfs for both arm64 & armhf
baremetal test jobs, and is smaller than either arm{64,hf}_test image
before.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
Doing so in an x86 container via qemu was slow, and started failing
recently after updating to a newer qemu version.
This also results in smaller arm*_test* docker images, since we need to
install fewer Debian packages in them.
As a bonus, this turns some piglit tests from fail to pass (Or maybe
they'll turn out to be flakes? They've passed at least 3 times in a
row).
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
We use the CI-built kernel+rootfs these days. I haven't bumped image tags
because the files are definitely unused, and I'm rebuilding it all in the
next commit.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
Waffle building requires libgl1-mesa-dev to add support for GLX. This
package is pulled automatically in arm64 container as a suggested
package, but no in armhf. Which means we end up having support for GLX
in waffle in arm64 but not in armhf.
Thus let's install explicitly this package to have support in both
cases.
Reviewed-by: Andres Gomez <agomez@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9562>
Without a way to exclude specific subdirectories, keeping the list
of all subdirectories which need to be tested is error prone.
It's better to run CI slightly more often than to miss it when
it is needed.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9609>
Getting piglit to fit onto our test devices was proving difficult, and we
need the ability to handle flakes, so switch to the rust piglit runner
that @pepp wrote as part of the deqp-runner repo which gives us flake
detection, sharding across boards, fractional runs, and almost half the
runtime.
It doesn't handle piglit subtests yet, but if you can't run piglit's
python on your devices because it's too bloated and unstable, this is a
way forward.
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9468>
This adds a piglit runner that we'll be using on freedreno, better
xfail/unexpectedpass handling for some cases (Missing->Pass, Warn->Warn),
better error logging for the Missing issue we've had in CI, a fix for a
source of Missing, and a pile more unit tests.
As a result, we now catch that the Missing results for a bunch of our
tests have gone away.
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9468>
As Windows now builds llvmpipe and lavapipe, we should be sure to run
their builds when these change.
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9518>
Keep the strace logs in job artifacts for tests which timed out.
This can be useful for figuring out why a timeout occurred.
strace cannot be used in jobs where ASAN is enabled, because ASAN's
leak checker also uses ptrace(), which isn't possible within strace.
Suggested-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9472>
In jobs where the wrapper isn't used, this leaves the
<build directory>/meson-logs/testlog.txt filename unchanged.
Also prepares for using different wrapper scripts in different jobs.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9472>
Windows doesn't actually distribute a full TLS CA certificate store, but
pulls them in over time with Windows Update. Try to prime it by manually
pulling the certificates and installing them.
This bumps the Windows tag to force a rebuild.
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9618>
So far, testing VC4 and V3D/V3DV requires the CI runners having access
to a Raspberry Pi 3/4 kernel, and the correspondent modules and
bootloader files. If a different kernel must be used, it means touching
the runners to provide them.
This commit adds the option to define an URL pointing to a (compressed)
tarball containing such files, without requiring dealing with the
runners. This link is provided through the `BM_BOOTFS` job variable.
The tarball must contain two directories in the root: a `/boot`
directory (containing the kernel, DTBs and bootloader files), and a
`/lib/modules` (or `/usr/lib/modules`) with the kernel modules.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9527>
Build deqp-runner with the `--locked` option to use dependencies
versions specified in `Cargo.lock`.
v2: Bump image tags.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Suggested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9368>
Since we don't manually enumerate the drivers using it, we have to retest
all drivers when changing it (which basically never happens, anyway).
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9353>
So far we were retrying the testing (through device rebooting) if we did
not detect the boot sequence.
But found a couple of times that the serial log can also be "lost"
during the testing process. In all those times a manual retry of the job
was enough to complete the test.
Thus, let's apply the retry once automatically in this case.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9335>
Highlight in red errors from the baremetal run, so user is more aware of
what happened.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9335>