For testing Mesa on LAVA devices with the amd64 architecture, build
kernels and rootfs in the same way as we do for arm64 and armhf.
Also add a few trivial jobs for a specific AMD Chromebook.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5903>
I mistakenly removed what I thought were remnants of when Freedreno used
LAVA for their DUTs. lava_arm.sh is used for baremetal, so re-add that
code.
Fixes: dcd171f5e9 ("gitlab-ci: More stable URL for kernel and ramdisk artifacts, for LAVA")
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5839>
Place the kernel and ramdisk into a place in the file server so the URL
will only change when the contents also change.
Also put the Mesa build into a separate tarball so the ramdisk's
contents don't change every build.
With proper caching in place, all devices in the same farm need only to
download the mesa tarball once, saving time.
As we switch to MinIO for making kernels and rootfs available to LAVA
devices, we can stop using Docker to distribute them.
Instead, build when needed in separate jobs that push directly to MinIO,
from where LAVA devices can download them.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5515>
Builds the renderdoc and apitrace programs so we can replay GL traces on
DUTs.
[Separated out from 5472's commit that also enabled the jobs in LAVA,
dropped unnecessary python packages from arm_build, fixed up arm64_test
build, traces-db in baremetal, new commit message by anholt]
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5433>
We build in Debian buster but were currently testing in bullseye-based
ramdisks. This has started being a problem since Python 3.7 was removed
from bullseye.
[ Also bumped arm_test containers, by anholt ]
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5433>
I'm going to enable the VK CTS on cheza, so swap the deqp we have in the
container. build-deqp-vk already included GLES deqp binaries and data,
and is a newer branch than the last opengl-es-cts tag.
This brings a few things back over from build-deqp-gl for testlog
extraction, and copyes out the GLES mustpass lists.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5266>
This is a set of kernel options I've come up with mostly cribbing from
chrome os's kernel config snippet. We also build an lzma kernel, as
uncompressed kernel is big but lzma is the only compression supported by
the bootloader. With that image, we have to pack it into a FIT formatted
image+dtb blob.
CONFIG_SUNRPC_DEBUG is added so that you can set "nfsrootdebug" to figure
out what's going wrong with your nfs mount (mine were "both the tcp and
nfsvers options were required, and don't try to use 'default' as the root
path to defer to DHCP's answer because otherwise you get
/tftpboot/default, just use an empty root path which doesn't prepend
/tftpboot.")
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5247>
This adds a few more variables that we found we needed for x86-to-arm dEQP
cross builds. Also note that we're now fixed to use ccache in the dEQP
builds.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
The x86 baremetal build would have an armhf cross file, and need the
kernel env setup.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
Our shared runners are set up for concurrent jobs ~= CPUs / 4 (x86) or 8
(ARM). If you use more build processes than that, then jobs may be
fighting each other for shared system resources, possibly to the point of
failure (we've seen one of the runners OOM on some jobs before, though I'm
not sure if this was the cause).
To try to systematically prevent the problem, we make a ninja wrapper in
the containers that passes the -j flags, and set MAKEFLAGS in the
container builds. This doesn't cover make in non-container builds, but I
believe we don't have any of those.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
Following on from the db410c conversion to baremetal testing, reuse the
same scripts in the same rack to run 7 db820c boards (#4/8 is failing in
the bootloader for unknown reasons).
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4177>
I'm working on moving the db410c CI from docker to LAVA, which means we
get to boot a custom kernel. To do that, we need to enable ARCH_QCOM in
the kernel, save the dtb around, and include abootimg in our container so
that we can generate combined kernel/dtb/ramdisk images for fastboot.
LAVA's fastboot support is unable to pack the overlay into an abootimg
image, just a cpio rootfs. We could flash the cpio rootfs after overlay
addition, but that takes 2 minutes to do, and causes wear on the devices.
Instead, we'll bring up the network at boot and use wget to fetch the
overlay. We'll want network support anyway, so that we can transfer the
failure xmls back to the gitlab job's artifacts at some point.
Since the msm GPU and realtek network firmware increase our payload by
3MB, add in firmware compression so that it doesn't waste as much RAM on
devices not using it.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
Use the normal build job to also prepare the artifacts for LAVA jobs.
For that, the build container needs to also build the test suites,
kernel, ramdisk, etc.
Then the build job will place the just-built Mesa in the ramdisk and the
test job can generate a LAVA job and point to those artifacts.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3295>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3295>
Take one step towards sharing code between the LAVA and non-LAVA jobs,
with the goals of reducing maintenance burden and use of computational
resources.
The env var DEQP_NO_SAVE_RESULTS allows us to skip the procesing of the
XML result files, which can take a long time and is not useful in the
LAVA case as we are not uploading artifacts anywhere at the moment.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cleans up .gitlab-ci/ a little, and allows using a single DEBIAN_EXEC
line for all container jobs.
v2:
* Use lava_arm.sh instead of arm_lava.sh for consistency with v2 of the
previous change
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
2019-11-15 16:21:10 +01:00
Renamed from .gitlab-ci/lava-debian-install.sh (Browse further)
Tomeu Vizoso
Eric Anholt
Rohan Garg
Michel Dänzer