And use the z32f_x24s8 helper struct in unpack_Z32_FLOAT_X24S8().
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
sed commands:
s/ARGB2101010_UINT\b/B10G10R10A2_UINT/g
s/ABGR2101010_UINT\b/R10G10B10A2_UINT/g
Reviewed-by: Reviewed-by: Roland Scheidegger <sroland@vmware.com>
It is quite hard to meet the dependency of the libxml2 python bindings
outside Linux, and in particularly on MacOSX; whereas ElementTree is
part of Python's standard library. ElementTree is more limited than
libxml2: no DTD verification, defaults from DTD, or XInclude support,
but none of these limitations is serious enough to justify using
libxml2.
In fact, it was easier to refactor the code to use ElementTree than to
try to get libxml2 python bindings.
In the process, gl_item_factory class was refactored so that there is
one method for each kind of object to be created, as it simplifies
things substantially.
I confirmed that precisely the same output is generated for GL/GLX/GLES.
v2: Remove m4/ax_python_module.m4 as suggested by Matt Turner.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Release the references to the sampler views before
destroying the pipe context.
v2: remove TODO and unrelated change
v3: move to st_texture.[ch], rename callback, add comment
v4: fix rebase mess up and add further cleanups
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.0 10.1" <mesa-stable@lists.freedesktop.org>
This can get called in some circumstances if both src type and dst type
have same width (seen with float32->unorm32). While this particular case
was bogus anyway let's just fix that as it can work trivially (due to the
way it was called it actually worked anyway apart from the assert).
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
When deciding if a clear color is suitable for fast clear,
take into account if a color channel is active in the
buffer format.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This patch introduces two pre-canned MOCS values: BDW_MOCS_WB
(write-back, all caches) and BDW_MOCS_WT (write-through, all caches).
We use write-through caching for render targets, and write-back for
all other data. (At least on Haswell, I believe write-back LLC/eLLC
didn't work for scan-out buffers, while write-through did.)
No performance analysis has been done on the impact of this patch.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
Core profile requires a non-default VAO to be bound. Currently, calls
to glVertexAttribPointer raise INVALID_OPERATION unless a VAO is bound,
and we never actually get any vertex data set. Trying to draw without
any vertex data can only cause problems. In i965, it causes a crash.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76400
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: mesa-stable@lists.freedesktop.org
This reverts commit d9b983519c.
Unfortunately it seems like rpath is evaluated before LD_LIBRARY_PATH,
so this breaks e.g. steam, as well as any other user of that env var,
if the llvm path happens to be where other libs also reside.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76082
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
These could probably be squashed into one of the previous commits.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
All of the functionality is implemented in a private function in the one
file where it is used.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Fix eglCreateImage() from a packed dma_buf surface with a non-zero offset
to pixels data. In particular, this fixes support for planar YUV surfaces
when they are individually mapped on a per-plane basis, i.e. when the
OES_EGL_image_external is not used and user application wants to use its
own shader code for composition, or processing on individual plane (OCL).
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Implementation note:
I don't use context for ralloc (don't know how).
The check on PROGRAM_SEPARABLE flags is also done when the pipeline
isn't bound. It doesn't make any sense in a DSA style API.
Maybe we could replace _mesa_validate_program by
_mesa_validate_program_pipeline. For example we could recreate a dummy
pipeline object. However the new function checks also the
TEXTURE_IMAGE_UNIT number not sure of the impact.
V2:
Fix memory leak with ralloc_strdup
Formatting improvement
V3 (idr):
* Actually fix the leak of the InfoLog. :)
* Directly generate logs in to gl_pipeline_object::InfoLog via
ralloc_asprintf isntead of using a temporary buffer.
* Split out from previous uber patch.
* Change spec references to include section numbers, etc.
* Fix a bug in checking that a different program isn't active in a stage
between two stages that have the same program. Specifically,
if (pipe->CurrentVertexProgram->Name == pipe->CurrentGeometryProgram->Name &&
pipe->CurrentGeometryProgram->Name != pipe->CurrentVertexProgram->Name)
should have been
if (pipe->CurrentVertexProgram->Name == pipe->CurrentFragmentProgram->Name &&
pipe->CurrentGeometryProgram->Name != pipe->CurrentVertexProgram->Name)
v4 (idr): Rework to use CurrentProgram array in loops.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This is much like _mesa_sampler_uniforms_are_valid, but it operates
across an entire pipeline object.
This function differs from _mesa_sampler_uniforms_are_valid in that it
directly creates the gl_pipeline_object::InfoLog instead of writing to
some temporary buffer.
This was originally included in another patch, but it was split out by
Ian Romanick.
v2 (idr): Fix the loop bounds. shProg isn't an array, so
ARRAY_SIZE(shProg) was 1, so only the vertex program was validated.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
V2 (idr):
* Keep the behavior of other info logs in Mesa: and empty info log
reports a GL_INFO_LOG_LENGTH of zero.
* Use a NULL pointer to denote an empty info log.
* Split out from previous uber patch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Test become green in piglit:
The updated ext_transform_feedback-api-errors:useprogstage_noactive useprogstage_active bind_pipeline
arb_separate_shader_object-GetProgramPipelineiv
arb_separate_shader_object-IsProgramPipeline
For the moment I reuse Driver.UseProgram but I guess it will be better
to create a UseProgramStages functions. Opinion is welcome
V2: formatting & rename
V3 (idr):
* Change spec references to core OpenGL versions instead of issues in the
extension spec.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Now arb_separate_shader_object-GetProgramPipelineiv should pass.
V3 (idr):
* Change spec references to core OpenGL versions instead of issues in
the extension spec.
* Split out from previous uber patch.
v4 (idr): Use _mesa_has_geometry_shaders in _mesa_UseProgramStages to
detect availability of geometry shaders.
v5 (idr): Whitespace cleanup, use _mesa_lookup_shader_program_err
instead of open-coding it again, and update some comments at the end of
_mesa_UseProgramStages. All suggested by Eric.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Extend use_shader_program to support a different target. Allow to reuse the
function to update the pipeline state. Note I bypass the flush when target
isn't current. Maybe it would be better to create a new UseProgramStages
driver function
This was originally included in another patch, but it was split out by
Ian Romanick.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
save and restore _Shader/Pipeline binding point. Rational we don't want any
conflict when the program will be unattached.
V2: formatting improvement
V3 (idr):
* Build fix. The original patch added calls to _mesa_use_shader_program
with 4 parameters, but the fourth parameter isn't added to that
function until a much later patch. Just drop that parameter for now.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Basically a sed but shaderapi.c and get.c.
get.c => GL_CURRENT_PROGAM always refer to the "old" UseProgram behavior
shaderapi.c => the old api stil update the Shader object directly
V2: formatting improvement
V3 (idr):
* Rebase fixes after a block of code was moved from ir_to_mesa.cpp to
shaderapi.c.
* Trivial reformatting.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
To avoid NULL pointer check a default pipeline object is installed in
_Shader when no program is current
The spec say that UseProgram/UseShaderProgramEXT/ActiveProgramEXT got an
higher priority over the pipeline object. When default program is
uninstall, the pipeline is used if any was bound.
Note: A careful rename need to be done now...
V2: formating improvement
V3 (idr):
* Build fix. The original patch added calls to _mesa_use_shader_program
with 4 parameters, but the fourth parameter isn't added to that
function until a much later patch. Just drop that parameter for now.
* Trivial reformatting.
* Updated comment of gl_context::_Shader
v4 (idr): Reformat spec quotations to look like spec quotations. Update
comments describing what gl_context::_Shader can point to. Bot
suggested by Eric.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Eliminate lp_vertex_shader, as it added nothing over draw_vertex_shader.
Simplify lp_geometry_shader, as most of the incoming state is unneeded.
(We could also just use draw_geometry_shader if we were willing to peek
inside the structure.)
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
As done in draw_pipe_aaline and draw_pipe_aapoint modules.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Cc: "10.0 10.1" <mesa-stable@lists.freedesktop.org>
* Add HAVE_PTHREAD, we do have pthread support wrappers now for
non-native Haiku threaded applications.
* Viewport changed behavior recently breaking the build.
We fix this by looking at the gl_context ViewportArray
(Thanks Brian for the idea)
Acked-by: Brian Paul <brianp@vmware.com>
The SIMD16 replicated FB write message only works if we don't need the
color calculator to mask our framebuffer writes. Previously, we bailed
on it if color_mask wasn't <true, true, true, true>. However, this was
needlessly strict for formats with fewer than four components - only the
components that actually exist matter.
WebGL Aquarium attempts to clear a BGRX texture with the ColorMask set
to <true, true, true, false>. This will work perfectly fine with the
replicated data message; we just bailed unnecessarily.
Improves performance of WebGL Aquarium on Iris Pro (at 1920x1080) by
abound 50%, and Bay Trail (at 1366x768) by over 70% (using Chrome 24).
v2: Use _mesa_format_has_color_component() to properly handle ALPHA
formats (and generally be less fragile).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Dylan Baker <baker.dylan.c@gmail.com>
WebGL Aquarium in Chrome 24 actually hits this.
v2: Move to core Mesa (wisely suggested by Ian); only consider
components which actually exist.
v3: Use _mesa_format_has_color_component to determine whether components
actually exist, fixing alpha format handling.
v4: Add a comment, as requested by Brian. No actual code changes.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Dylan Baker <baker.dylan.c@gmail.com>
When considering color write masks, we often want to know whether an
RGBA component actually contains any meaningful data. This function
provides an easy way to answer that question, and handles luminance,
intensity, and alpha formats correctly.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Dylan Baker <baker.dylan.c@gmail.com>
This gets us equivalent code paths on BDW and pre-BDW, except for stencil
(where we don't have MSAA stencil resolve code yet)
Improves MSAA-forced citybench by 7.94496% +/- 2.38429% (n=16). Reduces
DRI2 MSAA glxgears performance by -12.3559% +/- 1.52845% (n=9).
v2: Move the new meta code to brw_meta_updownsample.c, name it
brw_meta_updownsample(), add a comment about
intel_rb_storage_first_mt_slice(), and rename that function and move
the RB generation into it (review ideas by Ken).
v3: Fix 2 src vs dst pasteos in previous change.
v4: Skip this path pre-gen8 for now, until we can analyze the glxgears
performance delta some more.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that BindRenderbufferTexImage() is a thing that drivers can do, winsys
FBOs *can* have NeedsFinishRenderTexture set.
v2: Keep the short-circuit for non-BindRenderbufferTexImage() drivers
(review by Ken).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Even if the singlesample_mt got reopened from DRI due to
pageflipping/buffer swapping, our private miptree shouldn't need any
changes.
Improves performance of a little swapbuffers-loving microbenchmark with
MSAA forced on, by 1.2371% +/- 0.624802% (n=102)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Brian Paul
Zack Rusin
Christian König
José Fonseca
Roland Scheidegger
Kevin Rogovin
Kenneth Graunke
Ilia Mirkin
Chris Forbes
Ian Romanick
Gwenole Beauchesne
Gregory Hainaut
Alexander von Gluck IV
Eric Anholt