This reverts commit c9df92bf79.
It turns out that gitlab-runner uses kubernetes all wrong, spawning Pods
and sshing into them to run the script instead of Jobs containing the
script to run. This means that when anything goes wrong with the pod
(autoscale, preemption, VM maintenance, cluster reconfiguration), the job
fails and only sometimes gets handled as a runner system failure. Even
worse, due to bugs in either the runner or k8s itself, some classes of
timeout-related failure end up not being reported as failures, and the job
will incorrectly report success!
Disable using the "autoscale" cluster until we can do something else
(docker-machine instead of k8s, or the custom third-party k8s-native
runner).
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
The image used for test jobs is only about 1/6 as big as before, which
may help avoid some issues with some of the test boards.
Inspired by https://gitlab.freedesktop.org/mesa/mesa/issues/2046 .
v2:
* Leave LIBDRM_VERSION at 2.4.99 (Daniel Stone)
* Delete more build artifacts from dEQP tree (Daniel Stone)
v3:
* Set LD_LIBRARY_PATH for ldd
Acked-by: Daniel Stone <daniels@collabora.com> # v2
Reviewed-by: Eric Anholt <eric@anholt.net> # Except for the ldd line
GP handles gl_PointSize similar to gl_Position, i.e. it needs
separate buffer and it has special type in varying descriptors, also
for indexed draw we need to emit special PLBU command to pass
address of gl_PointSize buffer.
Blob also clamps gl_PointSize to 1 .. 100 (as well as line width),
so let's do the same.
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Run only jobs needed for testing on LAVA devices if a branch starts with
lava-ci-.
This allows developers to have faster test cycles as these pipelines
take only a bit above 8 minutes. Also has the advantage of conserving
resources.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
MALI_DEPTH_TEST should only be set when depth->writemask is true,
not when the depth test is enabled. Let's rename the flag and patch
panfrost_bind_depth_stencil_state() to do the right thing.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Clearly we do want to have fp16 at some point ... but I kind of give up
debugging and it turns out the issues with fp16 support in 'frost are so
deeply rooted that I might as well disable this non-opt and land
LCRA now.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Rather than having hw-specific swizzles encoded directly in the
instructions, have a unified swizzle arary so we can manipulate swizzles
generically.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The GKE pool we're using is 1-3 32-core VMs, preemptible (to keep
costs down), with 8 jobs concurrent per system. We have plenty of
memory (4G/core), so we run make -j8 to try to keep the cores busy even
when one job is in a single-threaded step (docker image download, git
clone, artifacts processing, etc.) When all jobs are generating work
for all the cores, they'll be scheduled fairly.
The nodes in the pool have 300GB boot disks (over-provisioned in space
to provide enough iops and throughput) mounted to /ccache, and
CACHE_DIR set pointing to them. This means that once a new
autoscaled-up node has run some jobs, it should have a hot ccache from
then on (instead of having to rely on the docker container cache
having our ccache laying around and not getting wiped out by some
other fd.o job). Local SSDs would provide higher performance, but
unfortunately are not supported with the cluster autoscaler.
For now, the softpipe/llvmpipe test runs are still on the shared
runners, until I can get them ported onto Bas's runner so they can be
parallelized in a single job.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The runner that submits jobs there is down and will turn some time to
get fixed. Disable them for now to keep the CI green.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Commit 9edcce2a32 bumped the required libdrm-amdgpu version to
2.4.100. Update the version we use in our CI scripts to avoid CI
build failures.
Also bump the debian image name for this change to take effect.
Note that amdgpu is only built with the debian-buster image,
so only this image requires an update.
Fixes: 9edcce2a ("ac: get tcc_harvested from the kernel")
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
This adds a new CI job that runs on windows with MSVC. It currently
builds softpipe and osmesa, and runs the related unit tests. It does
rely on meson's wraps for zlib, but I've set up caching of the wrap
dependencies so hopefully that wont be a problem.
I really wanted to user powershell for this, but there just isn't an
easy way to do that, it's much easier to use batch scripts, so thats
what I used.
The leading `/` for .gitlab-ci/lava... must be removed because windows
doesn't understand it, and when it reads the file the job ends in error.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
At this point meson should be able to handle all of the non-windows
platforms just fine; we'd like to be able to stop maintaining scons for
those platforms sooner than later.
Reviewed-by: Eric Anholt <eric@anholt.net>
Update to 5.4-rc4 so we can test Panfrost on devices with Mali T720 and
T820.
A bug was found that prevented things working at all on RK3288 devices,
so we carry a patch for now in my personal fork.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
This is useful for PBO texture upload with GL_RGB and GL_UNSIGNED_BYTE.
v2: Vasily Khoruzhick provided an update for the Lima CI expectations.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
v2:
* Use LLVM 8 from buster-backports
v3:
* Use LLVM 7 again for armhf, llvmpipe is still broken there with LLVM 8
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
This allows running the regression tests.
One downside is that we can't easily build the Vulkan overlay layer,
because only x86 binaries of the glslang validator are available. If
that's important, we could either use those binaries via qemu, or build
it from source.
v2:
* Add :amd64 suffix to existing debian-9/10 job names (Eric Engestrom)
Acked-by: Eric Engestrom <eric.engestrom@intel.com> # v1
Use https:// URLs in the APT configuration.
Drop --no-install-recommends, the image generation template disables
installation of recommended packages in /etc/apt/apt.conf.
Run apt-get autoremove at the end, cleaning up packages which were
installed to satisfy dependencies but are no longer needed.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
It's been throwing the following error today:
"<Fault -32603: 'Internal Server Error (contact server administrator
for details): could not extend file "base/17952/18226": No space left
on device\nHINT: Check free disk space.\n'>"
Reviewed-by: Daniel Stone <daniels@collabora.com>
A bunch of blend tests fixed on T760. A single blend test regressed on
both T760/T860 but I am unable to reproduce locally so am just
documenting the regression and moving on.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This will prevent us from accidentally falling back to the wrap-db
instead of using locally installed versions.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
The one debian provides is broken in buster+, so I've just written my
own. This allows meson to find the installed zlib and prevents it from
falling back to wraps.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
While at it, rename to singular "container" for consistency.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Run dEQP on boards with Mali 400 and 450 in Baylibre's lab.
There's lots of skipped tests because of crashes and undetermined
behavior. May be a good idea to run the tests with valgrind and fix any
issues found.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
As the non-LAVA runner script does, have per-GPU version files listing
the tests that are to be skipped, due to being very slow, unstable, etc.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Without this, the test jobs could spuriously run after the container
job failed or was cancelled, even if the build job didn't run at all.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
When only the depth/stencil bufs are cleared, we should make sure the
color content is reloaded into the tile buffers if we want to preserve
their content.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
glClear()s are expected to be the first thing GL apps do before drawing
new things. If there's already an existing batch targetting the same
FBO that has draws attached to it, we should make sure the new clear
gets a new batch assigned to guaranteed that the FB content is actually
cleared with the requested color/depth/stencil values.
We create a panfrost_get_fresh_batch_for_fbo() helper for that and
call it from panfrost_clear().
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
In the test stage, we can use any of the two container images as we
arent going to do anything architecture-dependent when submitting the
jobs to LAVA.
But if we are in a pipeline in which the images need to be rebuilt and
one finishes much earlier than the other, it could happen that the test
job that executes first fails to find the container image.
To avoid that, have each job in the test stage to use the image that has
been already implicitly built by depending on the build job for the
given arch.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
In preparation for testing drivers other than Panfrost in LAVA labs.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This is based on the fix I used for the same problem on V3D. In this
case, it fixes all but the the
dEQP-GLES2.functional.texture.filtering.2d.*_npot cases of
dEQP-GLES2.functional.texture.filtering.2d.*'s failures.
Acked-by: Rob Clark <robdclark@chromium.org>
This is needed in particular to get a recent enough version of meson in
the stretch image, but should be generally beneficial.
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Eric Anholt
Michel Dänzer
Vasily Khoruzhick
Tomeu Vizoso
Alyssa Rosenzweig
Boris Brezillon
Eric Engestrom
Arno Messiaen
Alexandros Frantzis
Erik Faye-Lund
Dylan Baker
Neil Armstrong
Chris Wilson
Kristian H. Kristensen