Both libraries implicitly require shared GLAPI which in itself mandates
shared libraries.
Stop pretending that one can use it and error out at configure stage.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
We should be using LIBS rather than the LDFLAGS variable. Furthermore
try to keep the linking to the final stage, rather than intermetent
static library.
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
We must make sure that xserver has an equivalent one-line
change to its configure.ac as the glx/glapi headers get copied over.
Then again, xserver does _not_ seem to set HAVE_ALIAS to begin with so
one might want to look into that first.
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Currently we have two macros - HAVE_ALIAS and GLX_ALIAS_UNSUPPORTED.
To make it even better former of which is explicitly cleared in some
cases while not in others.
Clear all that up by using a single macro properly set during configure.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This reverts changes 903eb09b5fb78d47d0f8a4bdf826a113ca2aff40..1a0aa468f354f0ee94dd383cd40ae915584624aa:
Tobias Droste (5):
configure.ac: Rename MESA_LLVM to FOUND_LLVM
configure.ac: Only set LLVM_LIBS if LLVM is used
configure.ac: Only define HAVE_LLVM if LLVM is used
configure.ac: Set and use HAVE_GALLIUM_LLVM define
configure.ac: Don't check LLVM version in gallium_require_llvm
They break scons build, and I'm not convinced this is the right fix. In
particular changing HAVE_LLVM in the C code is something I'd rather
avoid no matter what. So it's better to discuss without the pressure of
broken builds.
When compiling LLVM headers, including llvm-config.h, we need to respect
LLVM_CFLAGS. This is especially crucial if LLVM is located in a
non-standard location and it happens that llvm-config.h includes another
header. In such case the detection would fail due to missing header,
because the path is provided in LLVM_CFLAGS.
Let's add LLVM_CFLAGS to global CFLAGS for the time of detection and then
restore the original flags, as done in other places of the script.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This is actually not needed because the version is checked later.
Line 2609:
if test "x$enable_gallium_llvm" == "xyes"; then
llvm_require_version $LLVM_REQUIRED_GALLIUM "gallium"
llvm_add_default_components "gallium"
HAVE_GALLIUM_LLVM=xyes
DEFINES="${DEFINES} -DHAVE_GALLIUM_LLVM"
fi
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Gallium code used HAVE_LLVM to check if it needs to compile code for
LLVM in header and source files.
With the new logic HAVE_LLVM is always set. Use extra define to figure
out if LLVM is used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99010
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Make sure that HAVE_LLVM compiler define is only set if LLVM is
actually used.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
v2 [Emil] fold within the existing conditional
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This renames llvm_check_version_for to llvm_require_version and let it
set a variable to mark that LLVM will be used.
Use this to make a usefull configure output and to only check if the
libs are found in LLVM if it is actually used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99010
Signed-off-by: Tobias Droste <tdroste@gmx.de>
This renames MESA_LLVM to FOUND_LLVM and updates the config.log report
to say if LLVM is found or not, to make clear that this does not mean
that it is used.
There are no MESA_LLVM users so drop the AC_SUBST.
v2 [Emil]
- Polish test: -a over && test, = over ==, unquiote xyes
- other ?
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
dri3 allows us to send handle of a texture directly to X
so this patch allows a state tracker to directly send its
texture to X to be used as back buffer and avoids extra
copying
v2: use clip width/height to display a portion of the surface
v3: remove redundant variables, fix wrapping, rename variables
handle vaapi path
v3.1: we need clip_width/height for every frame so we don't need
to maintain it for each buffer instead use a global variable
v4: In case of single gpu we can cache the buffers as applications
use constant number of buffer and we can avoid calls to present
extension for every frame
Reviewed and Suggested-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Andy Furniss <adf.lists@gmail.com>
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
When EGL is used on some other thread than the thread that drives the
main wl_display queue, the Wayland EGL dri2 implementation is
vulnerable to a race condition related to display round trips and global
object advertisements.
The race that may happen is that after after a proxy is created, but
before the queue is set, events meant to be emitted via the yet to be
set queue may already have been queued on the wrong queue.
In order to make it possible to avoid this race, wayland 1.11
introduced new API that allows creating a proxy wrapper that may be used
as the factory proxy when creating new proxies via Wayland requests. The
queue of a proxy wrapper can be changed without effecting what queue
events emitted by the actual proxy will be queued on, while still
effecting what default queue proxies created from it will have.
By introducing a wl_display proxy wrapper and using this when performing
round trips (via wl_display_sync()) and retrieving the global objects (via
wl_display_get_registry()), the mentioned race condition is avoided.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Daniel Stone <daniels@collabora.com>
Changes from V1 -> V2:
- updated Copyright
- added $(top_srcdir)/src/gallium/winsys to include path (suggested by Emil)
- adapted driver to new renderonly API
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
This driver supports a wide range of Vivante IP cores like GC880,
GC1000, GC2000 and GC3000.
Changes from V1 -> V2:
- added missing files to actually integrate the driver into build system.
- adapted driver to new renderonly API
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Mesa requires ax_pthread_ok = yes, thus we can fold/rewrite the
conditional to follow the more common "if test" pattern.
No functional change intended.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
In the (not too) distant future we'd want to remove this option and
effectively drop the other codepath(s) we have in our dispatch.
Linux distributions have been using --enable-glx-tls for a number of
years. Some/most BSD platforms still don't support this, yet this should
serve as an encouragement to move things forwards.
Note: we had many bug reports were opened due to the wrong default
option. See the list below for details.
v2:
- Correct default option in help string (Andreas)
- Add bugzilla references.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70623
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72902
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73778
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89043
Cc: Jean-Sébastien Pédron <dumbbell@FreeBSD.org>
Cc: Jonathan Gray <jsg@jsg.id.au>
Cc: mesa-maintainers@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
This makes sure that we handle LLVM minor version >= 10 correctly.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Major and minor version are included in the header file since LLVM
version 3.1.0. Since the minimal required version is 3.3.0 we can
remove the workaround if no values for major/minor were found in the
header.
Since LLVM 3.6.0 the patch version is inside the header file of LLVM.
Only radeon drivers need the patch version and they depend on
LLVM >= 3.6.0, so this is safe too.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Consolidate the required LLVM versions at the top where the other
versions for dependencies are listed.
v5:
Splitted out separate changes (see patch 19 and 20)
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
LLVM components are only added when LLVM is needed.
This means gallium adds this as soon as "--enable-gallium-llvm"
is "yes" and radv + opencl add it explicitly.
v5:
Removed hunk that disabled LLVM for gallium if it was not found.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This moves the LLVM check for radv to the corresponding driver section.
No functional change.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This moves llvm_set_environment_variables to its final destination
and moves all the LLVM AC_SUBST() below the function call.
No functional change.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The LLVM checks can be anywhere below line 1161 now.
Move the openCL LLVM checks to the section with the other openCL checks.
No functional change.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[Emil Velikov: s/ipos/ipo/, drop "yes" argument from llvm_add_component]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This moves the function to get the LLVM environment variables higher
in the file. It still needs to be below the "--enable-opencl" because
it uses $enable_opencl.
It can be called without condition now as it only throws errors if
openCL is enabled.
v5:
HAVE_MESA_LLVM is only used for gallium. Rename it to HAVE_GALLIUM_LLVM.
In order to only link LLVM when it is needed, HAVE_GALLIUM_LLVM is only
set if "$enable-gallium-llvm" is yes.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
No need for an additional function here.
Use the same style for LLVM checks as the other drivers
(e.g. r300, llvmpipe) that don't need a load of other checks.
Instead of open conding the LLVM version check, use the
function used by other drivers.
"enable_gallium_llvm" is checked by gallium_require_llvm().
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This moves the LLVM version check to the helper function
gallium_require_llvm() and uses the llvm_check_version_for() helper
instead of open conding the LLVM version check.
gallium_require_llvm is functionally the same as before, because
"enable_gallium_llvm" is only set to "yes" if the host cpu is x86:
if test "x$enable_gallium_llvm" = xauto; then
case "$host_cpu" in
i*86|x86_64|amd64) enable_gallium_llvm=yes;;
esac
fi
This function is also only called now when needed.
Before this patch llvmpipe would call this as soon as LLVM is
installed. Now it only gets called by llvmpipe if gallium
LLVM is actually enabled (i.e. only on x86).
Both reasons mentioned above remove the need to check host cpu
in the gallium_require_llvm function.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
There are no non gallium r300 and r600 drivers anymore.
No need to explicilty mention gallium here.
Just cosmetics, no functional change.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This is handled by "llvm_check_version_for" for openCL.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
There's no harm in always searching llvm-config.
This way it's available as soon as possible for all functions.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This just moves code around so that all LLVM related stuff is at the
top of the file in the correct order.
No functional change.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
A function with the LLVM version checked is moved to the top.
The function is called where the old code was.
No functional change.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[Emil Velikov: s/ipos/ipo/, drop "yes" argument from llvm_add_component]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Use the new helper function to add LLVM targets and components.
The components are added one by one to later find out which component
is missing in case there is one.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[Emil Velikov: s/ipos/ipo/, drop "yes" argument from llvm_add_component]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Add functions to add and check targets/components.
Not used in this patch.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This way LLVM_CONFIG can bet set from an env variable if it's outside
the $llvm_prefix.
This is not a must, but it helps testing.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This pulls amd/common build rules into upper level makefile,
along with amd/addlib which is already there.
v2: [Emil Velikov]
- Move NEED_RADEON_LLVM conditional, drop amd/common from SUBDIRS
- Drop AM_ from common_libamd_common_la*
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
It's not dependent on GLSL and it can be useful for shader caches that don't
deal with GLSL.
v2: address review comments
v3: keep the other 3 lines in configure.ac
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
It's possible to build Mesa for Android using the traditional
autotools workflow [1]. ChromiumOS fetches Android prebuilts and
puts them in a sysroot. We now want to use pkg-config to specify
the location of system headers and libraries [2].
To enable this, let's add the required pkg-config checks and link
against them.
[1] https://developer.android.com/ndk/guides/standalone_toolchain.html
[2] https://chromium-review.googlesource.com/#/c/403237/
v2: Bundle pkg-config checks together (Emil)
v3: Provide further context on standalone NDK Mesa build (Emil)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
In Android, the pthreads libs are in bionic. When building
Mesa for Android with the autotools workflow, we shouldn't
set -lpthread or -pthread.
[Emil Velikov]
Other platforms could use a similar fix, although that is left as
separate exercise.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This reverts commit a39ad18593.
The commit aims to address "missing" -L/foo/bar during linking stage. At
the same time it doesn't add the -L and yet the LLVM_LDFLAGS [which
provide -L/foo/bar] are already used throughout.
Seems like something pretty unique (broken?) on my end. Since the commit
introduces issues (due to the missing -L) revert until we get to the
root of it (PEBKAC or a genuine issue).
Currently if one uses a non-default prefix, the path won't get
propagated and we'll fail at link-time.
A very quick and easy example is to install to /usr/local.
At this point, llvm-config will be picked even without the
--with-llvm-prefix, but regardless of the latter linking will fail.
Currently people can workaround that via LD_LIBRARY_PATH.
Cc: "12.0 13.0" <mesa-stable@lists.freedesktop.org>
Cc: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Emil Velikov
Jose Fonseca
Tomasz Figa
Tobias Droste
Nayan Deshmukh
Jonas Ådahl
Chuck Atkins
Christian Gmeiner
The etnaviv authors
Eric Anholt
Rob Clark
Mauro Rossi
Marek Olšák
Gurchetan Singh
Emil Velikov
Jason Ekstrand