Also, stop setting wsi_device::signal_semaphore/fence_with_memory
because those cause the WSI code to call the function we just dropped.
Since the core WSI code is now setting dummy syncs by default, we don't
need any of this anymore.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4037>
The WSI code wants to remain generic and try and use vulkan APIs,
even though these queues aren't exposed through the API.
Add the transfer queue to the end of the queues.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15357>
Not all Vulkan implementations allows rendering to linear images, so in
order to support scanning out from these on Windows we might have to copy
through a buffer like we do in the PRIME path.
To avoid reimplementing the same, let's instead generalize the code a
bit so it doesn't have to specfy any PRIME-specific details.
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12210>
This make things all fall back to the common synchronization functions
which will switch things to the new submission path and to use
vk_fence and vk_semaphore.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
radv: Use common AcquireNextImage2KHR.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
radv: Use common functions for Metro Exodus layer.
Needs to be squashed with the big "switch the world" deletion patch
but kept it separate for review.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13974>
Since RADV requires DRM 3.35+, this code can be simplified.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9953>
Linux Kernel 4.15+ is now required for RADV, this kernel has been
released 3 years ago and should be in most modern distros.
This allows us to remove a lot of legacy code for fence/semaphore.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9800>
We had two different implements for the global BO list, one in RADV
and one in the winsys. This will also allow to make more BOs resident.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8868>
I think this has the SQTT layer hooked in correctly, would
be good if somebody could confirm this.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8676>
This moves to using the common base structs for these
two objects, this is prep work for the using the common
dispatch layer code.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8676>
This adds an option to the WSI support for a software path to be
used with the vulkan sw drivers. There is probably some changes
that could be made to improve this and use present, for now
just use put image.
v2: roll out flag across all drivers (Eric)
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6082>
Also reverse the BO list removal loop. This way typical WSI usage
should find the entry in O(active swapchains) iterations, which
should not be a performance issues. Tested with Doom(2106) which
found the entry in 1 iteration every time.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4306>
This is pretty basic (and a bit crappy at the moment). I think we
might want some sort of overlay in the future and also be able to
trigger captures with F12 or whatever.
To record a capture, set RADV_THREAD_TRACE to something greater than
zero (eg. RADV_THREAD_TRACE=100 will capture frame #100). If the
driver didn't crash (or the GPU didn't hang), the capture file
should be stored in /tmp.
To open that capture, use Radeon GPU Profiler and enjoy your
profiling times with RADV! \o/
Note that thread trace support is quite experimental, only GFX9 is
supported at the moment, and a bunch of useful stuff are still missing
(shader ISA, pipelines info, etc). More is comming soon.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3900>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3900>
Winsys semaphores without signal operation get silently ignored.
Not so for syncobjs, so actually signal them.
Fixes: 84d9551b23 "radv: Always enable syncobj when supported for all fences/semaphores."
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2030
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Other types like syncobj do not need it, so lets make things a bit more uniform.
Also reduce confusion what the signalled/submitted referred to (especially with
imported fences)
Reviewed-by: Dave Airlie <airlied@redhat.com>
The dri options are optional. When the dri options are not provided
the WSI will not use adaptive sync.
FWIW I think for xf86-video-amdgpu this still requires an X11 config
option, so only people who opt in can get possible regressions from this.
So then the remaining question is: why do this in the WSI?
It has been suggested in another MR that the application sets this.
However, I disagree with that as I don't think we'll ever get a
reasonable set of applications setting it.
The next questions is whether this can be a layer. It definitely
can be as implemented now. However, I think this generally fits
well with the function of the WSI. Furthemore, for e.g. the DISPLAY
WSI this is much harder to do in a layer.
Of course, most of the WSI could almost be a layer, but I think
this still fits best in the WSI.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
This lets us avoid passing the DRM fd around all over the place and gets
us closer to layer utopia.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
This got missed during 1.1 enabling because it was defined as an
interaction between device groups and WSI and it wasn't obvious it was
in the delta.
The idea behind it is that it's supposed to provide a hint to the
application in a multi-GPU setup to indicate which regions of the screen
are being scanned out by which GPU so a multi-device split-screen
rendering application can render each part of the screen on the GPU that
will be presenting it and avoid extra bus traffic between GPUs. On a
single-GPU setup or one which doesn't support this present mode, we need
to do something. We choose to return the window size (or a max-size
rect) if the compositor, X server, or crtc is associated with the given
physical device and zero rectangles otherwise.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We already have wsi_device and we know the instance allocator at
wsi_device_init time so there's no need to pass it into the physical
device queries. This also fixes a memory allocation domain bug that can
occur if CreateSwapchain gets called prior to any queries (not likely)
in which case the cached connection gets allocated off the device
instead of the instance.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This was added as part of 1.1 but it's very hard to track exactly what
extension added it. In any case, we should implement it.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Dave Airlie <Airlied@redhat.com>
This extension is required to support EXT_display_control as it offers
a way to query whether the vblank counter is supported.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This adds support for the KHR_display extension support to the vulkan
WSI layer. Driver support will be added separately.
v2:
* fix double ;; in wsi_common_display.c
* Move mode list from wsi_display to wsi_display_connector
* Fix scope for wsi_display_mode andwsi_display_connector
allocs
* Switch all allocations to vk_zalloc instead of vk_alloc.
* Fix DRM failure in
wsi_display_get_physical_device_display_properties
When DRM fails, or when we don't have a master fd
(presumably due to application errors), just return 0
properties from this function, which is at least a valid
response.
* Use vk_outarray for all property queries
This is a bit less error-prone than open-coding the same
stuff.
* Remove VK_COMPOSITE_ALPHA_INHERIT_BIT_KHR from surface caps
Until we have multi-plane support, we shouldn't pretend to
have any multi-plane semantics, even if undefined.
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
* Simplify addition of VK_USE_PLATFORM_DISPLAY_KHR to
vulkan_wsi_args
Suggested-by: Eric Engestrom <eric.engestrom@imgtec.com>
v3:
Add separate 'display_fd' and 'render_fd' arguments to
wsi_device_init API. This allows drivers to use different FDs
for the different aspects of the device.
Use largest mode as display size when no preferred mode.
If the display doesn't provide a preferred mode, we'll assume
that the largest supported mode is the "physical size" of the
device and report that.
v4:
Make wsi_image_state enumeration values uppercase.
Follow more common mesa conventions.
Remove 'render_fd' from wsi_device_init API. The
wsi_common_display code doesn't use this fd at all, so stop
passing it in. This avoids any potential confusion over which
fd to use when creating display-relative object handles.
Remove call to wsi_create_prime_image which would never have
been reached as the necessary condition (use_prime_blit) is
never set.
whitespace cleanups in wsi_common_display.c
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Add depth/bpp info to available surface formats. Instead of
hard-coding depth 24 bpp 32 in the drmModeAddFB call, use the
requested format to find suitable values.
Destroy kernel buffers and FBs when swapchain is destroyed. We
were leaking both of these kernel objects across swapchain
destruction.
Note that wsi_display_wait_for_event waits for anything to
happen. wsi_display_wait_for_event is simply a yield so that
the caller can then check to see if the desired state change
has occurred.
Record swapchain failures in chain for later return. If some
asynchronous swapchain activity fails, we need to tell the
application eventually. Record the failure in the swapchain
and report it at the next acquire_next_image or queue_present
call.
Fix error returns from wsi_display_setup_connector. If a
malloc failed, then the result should be
VK_ERROR_OUT_OF_HOST_MEMORY. Otherwise, the associated ioctl
failed and we're either VT switched away, or our lease has
been revoked, in which case we should return
VK_ERROR_OUT_OF_DATE_KHR.
Make sure both sides of if/else brace use matches
Note that we assume drmModeSetCrtc is synchronous. Add a
comment explaining why we can idle any previous displayed
image as soon as the mode set returns.
Note that EACCES from drmModePageFlip means VT inactive. When
vt switched away drmModePageFlip returns EACCES. Poll once a
second waiting until we get some other return value back.
Clean up after alloc failure in
wsi_display_surface_create_swapchain. Destroy any created
images, free the swapchain.
Remove physical_device from wsi_display_init_wsi. We never
need this value, so remove it from the API and from the
internal wsi_display structure.
Use drmModeAddFB2 in wsi_display_image_init. This takes a drm
format instead of depth/bpp, which provides more control over
the format of the data.
v5:
Set the 'currentStackIndex' member of the
VkDisplayPlanePropertiesKHR record to zero, instead of
indexing across all displays. This value is the stack depth of
the plane within an individual display, and as the current
code supports only a single plane per display, should be set
to zero for all elements
Discovered-by: David Mao <David.Mao@amd.com>
v6:
Remove 'platform_display' bits from the build and use the
existing 'platform_drm' instead.
v7:
Ensure VK_ICD_WSI_PLATFORM_MAX is large enough by
setting to VK_ICD_WSI_PLATFORM_DISPLAY + 1
v8:
Simplify wsi_device_init failure from wsi_display_init_wsi
by using the same pattern as the other wsi layers.
Adopt Jason Ekstrand's white space and variable declaration
suggestions. Declare variables at first use, eliminate extra
whitespace between types and names, add list iterator helpers,
switch to lower-case list_ macros.
Respond to Jason's April 8 review:
* Create a function to convert relative to absolute timeouts
to catch overflow issues in one place
* use VK_NULL_HANDLE to clear prop->currentDisplay
* Get rid of available_present_modes array.
* return OUT_OF_DATE_KHR when display_queue_next called after
display has been released.
* Make errors from mode setting fatal in display_queue_next
* Remove duplicate pthread_mutex_init call
* Add wsi_init_pthread_cond_monotonic helper function to
isolate pthread error handling from wsi_display_init_wsi
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v9:
Fix vscan handling by using MAX2(vscan, 1) everywhere. Vscan
can be zero anywhere, which is treated the same as 1.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v10:
Respond to Vulkan CTS failures.
1. Initialize planeReorderPossible in display_properties code
2. Only report connected displays in
get_display_plane_supported_displays
3. Return VK_ERROR_OUT_OF_HOST_MEMORY when pthread cond
initialization fails.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
4. Add vkCreateDisplayModeKHR. This doesn't actually create
new modes, it only looks to see if the requested parameters
matches an existing mode and returns that.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This implements strict checking for the entrypoint ProcAddr
functions.
- InstanceProcAddr with instance = NULL, only returns the 3 allowed
entrypoints.
- DeviceProcAddr does not return any instance entrypoints.
- InstanceProcAddr does not return non-supported or disabled
instance entrypoints.
- DeviceProcAddr does not return non-supported or disabled device
entrypoints.
- InstanceProcAddr still returns non-supported device entrypoints.
Reviewed-by: Dave Airlie <airlied@redhat.com>
The WSI core code does all the hard work. Just add the wrappers and
turn it on.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Now that we have anv_device_init/finish functions, there's no reason to
have the individual driver do any more work than that.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This drops the unneeded callbacks struct as well as the queue_get_family
callback we were using before we'd pulled QueuePresent inside.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This lets us move wsi_interface to wsi_common_private.h
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Unfortunately, due to the fact that AcquireNextImage does not take a
queue, the ANV trick for triggering the fence won't work in general. We
leave dealing with the fence up to the caller for now.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
v2 (Jason Ekstrand):
- Rebase
- Alter the names of the helpers to better match the vulkan entrypoints
- Use the helpers in anv
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This moves bits out of all four corners (anv, radv, x11, wayland) and
into the wsi common code. We also switch to using an outarray to ensure
we get our return code right.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
v2 (Jason Ekstrand):
- Better comit message
- Rebase
- Re-indent to follow wsi_common style
- Drop the unneeded _swapchain from the newly added helper
- Make the clone more true to the original (as per the rebase)
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This uses the mock extension created in a previous commit to tell the
driver that the image it's just been asked to create is, in fact, a
window system image with whatever assumptions that implies. There was a
lot of redundant code between the two drivers to do basically exactly
the same thing.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>