This must be set to ICD_LOADER_MAGIC by vkAllocateCommandBuffers, which
was being done when allocating a new buffer but not when reusing an
existing one in the cache. This would hit an assertion and crash in
debug builds of the Vulkan loader.
Fixes: 682248db45 ("radv: Cache command buffers in command pool.")
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I think we should only flush right before an action (draw/dispatch etc.),
as otherwise it is too easy to issue redundant flushes.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Without stores, the only writes are fast clears, transfers and metadata
initialization, each of which have the appropiate invalidations already.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The data should always be in memory after a src flush.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This fixes the wrong dynamic buffer descriptors being updated when
firstSet > 0.
Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If we have any pending flushes on the primary command buffer, these
must be performed before executing the secondary buffer.
This fixes potential corruption when the contents of a subpass which
clears any of its render targets are given in a secondary buffer: the
flushes after a fast clear would not have been performed until the
vkCmdEndRenderPass call.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: 13.0 17.0 <mesa-stable@lists.freedesktop.org>
Mainly to avoid gcc's complains about uninitialized ptr and offset use
later in that code.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
So that we don't keep allocating BOs for the IBs and upload buffers.
We run some risk of memory increase with e.g. a bimodal size
distribution of command buffers, but I haven't noticed a significant
increase with dota2 and talos.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Otherwise if the new compute pipeline is the same as the last used
pipeline before the call, we don't emit it again.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: 13.0 17.0 <mesa-stable@lists.freedesktop.org>
This adds support to write to sample mask from the fragment shader.
We can optimise this later like radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The code was interpolating at the offset from the sample,
not the offset from the center. Also fix for persample interpolation
modes we should force the pixel center to be at the sample.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The preamble flushes now and the rest is the responsibility of the app.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This splits out the cache flush bit setting code
dependent on the src/dest access flags.
It then calls it from the subpass barrier code.
It also marks a TODO to remove the aggressive CS/PS
flushes at some point.
This fixes a bunch of the
dEQP-VK.renderpass.attachment_allocation.input_output.*
tests.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just keeps popping up minor problems and regressions we should
revisit in a more sustainable manner later.
This also reverts:
Revert "radv: query cmds should mark a cmd buffer as having draws."
Revert "radv: also fixup event emission to not get culled."
This reverts commit d1640e7932.
This reverts commit 8b47b97215.
This reverts commit b4b19afebe.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This iterates the fast clear flush across the layers in the
specified range.
It also moves the compute resolve flush into the function
and builds the range in there.
This fixes:
dEQP-VK.geometry.layered.* regressions since fast clears.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I assume this wants to check if all pipelines use the same SGPR for
the rings.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
This is possibly a bad idea, I might have to consider a better one.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This ports the remains of the workarounds from radeonsi for
the non-TESS cases. It should provide equivalent workarounds
for hawaii and bonarie.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This puts the common gfx state for the device into an
indirect buffer, and just calls out to it, on CIK and above.
This is taken from what radeonsi does.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If a buffer is just full of flushes we flush things on command
buffer submission, so don't bother submitting these.
This will reduce some CPU overhead on dota2, which submits a fair
few command streams that don't end up drawing anything.
v2: reorganise loop to count first then malloc,
rename some vars (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The CTS tests at least are using this, and we were totally
ignoring it.
This hopefully fixes the bouncing multisample CTS tests.
v2: get family mask in ignored case from command buffer.
v3: only change things in one place, use logic from Bas.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Fixes:
dEQP-VK.geometry.layered.1d_array.fragment_layer
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This emits the compiled geometry shader and other state registers.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This uses the scratch infrastructure to handle the esgs
and gsvs rings.
(this replaces the old code that did this with patching).
v2: fix correct ring sizes, reset sizes (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This emits the shader to the ES block in the correct case.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This enables the paths for setting up user ptrs to vs/es and gs.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is to later allow ES shaders to be emitted.
Review-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Prevent Coverity seeing potential errors when src is
no initialized in the switch case.
Coverity-Id: 1396397
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is part of the spec and fixes CTS tests:
dEQP-VK.api.object_management.alloc_callback_fail_multiple.command_buffer_*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Along the lines of what
3b804819 anv: Default PointSize to 1.0 if not written by the shader
does for anv, program a default point size in the hw of 1.0.
This preempt fixes a bunch of geom shader tests.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes some issues we'd hit later if using viewport
indexes.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds the infrastructure to allow writing layer
and viewport index. It's just a first patch out of the geom
shader tree, and doesn't do much on its own.
v2: add missing if statement change (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Smith
Bas Nieuwenhuizen
Fredrik Höglund
Grazvydas Ignotas
Dave Airlie
Robert Foss
Andres Rodriguez