They're too slow to run in CI even on non-tiled renderers, they don't
block conformance (unless you crash), and provide unreliable warning
results unless you isolate them from other activity on the system.
This means that the following jobs now skip these tests:
- deqp-iris-*
- deqp-llvmpipe (you know, the one mentioned in the comment!)
- deqp-virgl-gl
- deqp-zink-lvp
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11333>
The mustpass doesn't have any tests matching these, so no need to
skip. These tests only show up if you run without using a mustpass list.
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11333>
When adding crosvm to the x86_test-gl building deqp-runner was also
mistakenly introduced. deqp-runner is already included in the
x86_test-base image.
Additionally, when bumping the deqp-runner version, only the
x86_test-gl tag was updated.
Now, we remove the unnecessary build from x86_test-gl and bump the tag
for the x86_test-base image.
v2:
- Bump x86_test-gl, not x86_test-vk (Tomeu).
v3: add in fixes for duplicated lines in lvp xfails (Anholt)
Fixes: dc9cd18f52 ("ci: Build Crosvm in our container")
Fixes: 53826932db ("ci: Update piglit and deqp/piglit-runner.")
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Corentin Noël <corentin.noel@collabora.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11359>
The screensaver kicks in at 10 minutes and obscures the screen,
independent of dpms. This causes piglit tests to get flaky (swaps start
taking a whole second, and swapbuffersmsc-divisor-zero times out at
exactly the wrong time) and slow if the run takes longer than 10 minutes.
Hopefully with this we'll see some piglit glx flakes go away forever, it
did seem to for this test locally.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11334>
The a530s will occasionally fail to make it to the fastboot prompt,
with no other deltas between a working log and a log stalled waiting
for that line to show up.
So, add a serial timeout (like the rpi boards do for similar reasons),
and on timeout restart the run. We actually restart the whole serial
watching process, because the SerialBuffer finishes itself on timeout.
This should also help with the intermittent issue we've had where a
power cycle causes the python serial module to throw an exception.
Tested with the gitlab-disabled db820c that never makes it to the
fastboot prompt (I think it's one where we need a longer micro cable
to connect it!) and saw successful boot looping to retry.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11308>
I was today years old when I learned this about classic composable UNIX
tools:
~/mesa/mesa lava-submitter-overlay * % bash
[daniels@strictly mesa]$ set -e
[daniels@strictly mesa]$ false | tee
[daniels@strictly mesa]$ echo $?
0
Use tail rather than tee, so it doesn't hide our exit status.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>
Frequency of writes is unlikely to be a performance bottleneck, and
given the number of steps in between execution and the user, less
buffering is gooder.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>
Truth is relative in 2021, and Python's duck-typing means truthiness
isn't what you think it is. Use an explicit fatal-error handler to make
sure we crash out hard on failure, rather than hoping sys.exit() behaves
like you think it does, because it doesn't.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>
Trying to get arbitrary strings suitably quoted for shell, embedded in a
YAML file, processed by Python templating, is like seven bad ideas all
embedded into one big can of bees.
Reuse the same script we use for bare-metal to generate the environment,
tar that up into a per-job overlay which is added to the
inter-pipeline-reusable rootfs built by the container jobs and the
intra-pipeline-reusable overlay built by the build jobs.
@anholt wrote a chunk of this - replacing the $ENV_VARS GitLab CI
variable with a Python loop across the POSIX job environment - in
!11192, but this still had YAML quoting nightmares, and was more
needless duplication between LAVA and bare-metal.
The diff is large and annoying, but is mostly a sed job to get
ENV_VARS="FOO=bar BAZ=quux" into FOO: bar\nBAZ: quux.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>
Used for both LAVA (uploading results to MinIO because we don't yet have
non-ephemeral NFS storage) and Piglit (for the Tracie dashboard).
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>
Our variable names haven't aged very well. Rename them to make them more
clear and straightforward, especially when we bring in a third rootfs
element to download.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>
Split our init up into: base system setup (filesystem mounts, network),
pulling the build artifacts, environment common to us and bare-metal,
bespoke environment, and finally running the tests.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>
As the JWT is sensitive, we don't want to record or leak it anywhere.
Doing this lets us run --dump-yaml in normal execution so we can
artifact the result, as well as bringing us into line with bare-metal.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11309>
This brings in some major new features in the runner:
- piglit tests now include subtest reporting
- "-t" support for quick include-filtering of tests.
- piglit tests that crash after their result report are considered crashes.
- throws a nice error if you try to annotate the same failure twice
(e.g. lvp's dEQP-VK.glsl.builtin.precision.pow.highp.vec2,Fail)
Since the runner catches piglit test bugs where the same subtest is run
twice, we also uprev piglit to pull in the fixes for those.
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11283>
We no longer name the template by the test suite being run.
Fixes: 93ec399b28 ("ci: Use a single template for LAVA jobs")
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11293>
LAVA doesn't consider failure to download a kernel/initramfs as an
infrastructure error, rather just a user error for supplying a broken
URL. We know our URLs aren't broken (because we're perfect), so assume
that failures in download validation are network issues and retry when
we hit them.
LAVA itself has been fixed to retry internally, so we'll get that when
upgrade in a couple of weeks, but gloss over it for now.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11218>
Each step in a LAVA job returns separate results; a successfully-retired
job can have about 12 entries. Make sure we iterate through all of them
when we're looking for infrastructure errors.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11218>
We added lava_job_submitter.py to improve our robusteness, but
the final result reporting was not handled correctly by the script.
This change fix it by properly calling sys.exit() on failures.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11218>
And also add the required bits to the x86_64 kernel.
syslogd is needed by Crosvm.
iptables is needed to route packets in and out the VM.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10862>
hang-detection is a vulkan-based lightweight wrapper from
parallel-deqp-runner that periodically submits empty command buffers
and waits for their completions. If the completion never happens, the
GPU is considered hung, the wrapped script is killed, and the job
should get aborted.
This should have no negative impact on the runtime of dEQP/traces/...,
but will allow saving time when the GPU gets hung as we can abort the
job immediately rather than waiting for the timeout.
In the case of B2C, we are using this tool's error message as a way to
trigger the reboot of the test machine and start again.
v2:
- Use hang-detection already with some jobs (Martin).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11087>
When we remove the contents of the results directory, we `cd` into it.
The script expects that $PWD is /piglit, and $OLDPWD is the Mesa build
directory, however the cd into the results directory will make $OLDPWD
be $BUILDDIR/results.
This means that Piglit emits into results/results/ which looks weird,
but more importantly also fails OpenCL Piglit execution, because we
can't find our baseline result expectations.
Fix it by using an explicit variable rather than relying on history.
Fixes: 683ddf19dc ("ci: remove results directory content only with piglit runners")
Ref: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10856
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11126>
So we don't need to provision aarch64 servers, which are these days
rarer than x8_64.
In the switch to the new runner tags, switch to one which contains the
device type, so we can dimension the runner jobs taking into account the
number of DUTs available.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11108>
Following the rest of our channels, move CI reporting over. Seems to
still work fine. This affects freedreno and iris.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11020>
Now, flakes that aren't in the *-flakes.txt get a "NEW" in their report so
I can watch for them.
The bash was unwieldy and made debugging hard, so I switched to python.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11020>
Covert the job submission process to a python script for more
robustness and control. allowing easier manipulation of job data.
As a result, it adds retry logic to deal with Infrastructure Errors in LAVA.
_call_proxy() is equipped with a robust retry logic, which I have been
using already in the past few weeks in stress testing to run hundreds
of jobs.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11079>
Lock CPU frequency scaling to max to speed up test execution and lower
the variation of frame times from performance replay jobs.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Corentin Noël <corentin.noel@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11101>
This reverts commit eef5409df4.
I suspect this has caused a lot of the CI instability today -- some flakes
were already added, but the a630-traces job is still flaking. Revert
until a fix makes it stable.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11024>
Use Piglit's replay profile to measure and store the time that frames
take to render in the GPU.
This job won't run automatically in regular pipelines, but will be
triggered automatically by a script for every successful pre-merge
pipeline.
This is because we want to generate performance data for every relevant
commit merged in main, but we don't want to keep a device busy during
the pre-merge run.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-By: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7987>
Lock CPU and GPU frequency scaling on devices so to speed up test
execution and lower the variation of frame times from performance replay
jobs.
Also disable autosuspend of the GPU device.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-By: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7987>
In order to reduce the amount of building work and network traffic, we
use docker caching. For that, we use the MESA_IMAGE_TAG and
MESA_BASE_TAG env variables which build the MESA_IMAGE variable to
identify different containers.
We are also using these tags to identify the cached artifacts produced
by other containers when those are part of the underlying OS to run
directly in DUTs through the DISTRIBUTION_TAG env variable.
The undesirable collateral effect is that we cannot combine a test job
using a container which would like to make use of some of the cached
artifacts created by another container. In other words, we cannot have
a job using a DISTRIBUTION_TAG and a MESA_IMAGE using a different
MESA_[IMAGE|BASE]_TAG variables.
Now, we split the usage in the DISTRIBUTION_TAG through the definition
of MESA_ARTIFACTS_TAG AND MESA_ARTIFACTS_BASE_TAG.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10977>
Instead of installing the distribution package, build and install
locally, including the tests.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10870>
ci-fairy minio ls will try to list files in the path given, which for
trace buckets is generally forbidden. We don't really need to do any
listing in this case, so use wget instead to check that the reference
image doesn't exist yet.
Previous to this patch, trace jobs would re-upload all reference images
to minio every time because they wouldn't be able to verify that the
reference image was already there. Jobs would often take up to 4 minutes
needlessly re-uploading these files.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10953>
Changes to Panfrost or Freedreno should not trigger ppc64 rebuilds.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10926>
Panfrost has two compilers, one for Midgard GPUs and one for Bifrost
GPUs. The respective compilers are src/panfrost/midgard and
src/panfrost/bifrost. Changes internal to just one compiler (or
disassembler) cannot affect the other hardware, so there's no need to
run extra jobs in these cases.
Also split out common vs Gallium panfrost so we can do the right thing
for panvk builds in the imminent future.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10924>
Run part of the VK CTS in 3 devices with Stoney Ridge graphics.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Corentin Noël <corentin.noel@collabora.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10853>
Removing the directory itself can be problematic with certain runner
strategies (B2C).
v2:
- Better deleting pattern matching since the previously used one was
problematic and not pointed out by /bin/sh, as noticed by Emma.
v3:
- Check that the results directory exists before attempting to
delete its content.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10856>
And enable it in the radv's Raven traces job.
v2:
- Adapt to changes in the start-x.sh script.
v3:
- Not deleting any more the non-existent by now
".gitlab-ci/common/start-x.sh" script (Martin).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10856>
Only the AMD video drivers for xorg are added since there are no other
expected users by now.
v2:
- Remove the start/stop logic from the x.sh script. We don't care
about stopping since that's already managed by gitlab-ci (Emma).
v3:
- Remove mistakenly added ".gitlab-ci/common/start-x.sh"
script (Martin).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10856>
This covers dEQP-EGL, GL, and GLES on GLK, APL (BXT), and AML-Y
Chromebooks. The GLES tests are fractional runs on some boards to keep
the pipeline time down. Flakes are reported to #intel-ci on freenode.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10438>
This pulls in a fix for replayer to make the backends send their
stderr to sys.stderr always.
v2:
- Updated piglit results for llvmpipe, softpipe, zink and
radeonsi-stoney.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> [v1]
Reviewed-by: Martin Peres <martin.peres@mupuf.org> [v1]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10854>
This version adds support for some Chromebooks with the MT8183 SoC that
we want to use to test Panfrost.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10785>
This pulls in a fix for the max-texture-size test using piglit-runner,
among other things.
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10749>
Just create such an empty file if there isn't already.
So drivers that are expected to pass all tests don't need to commit an
empty results file.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10295>
When I last time fixed this, I missed that continuing here would make us
leak pointers in the translate state, which is what made this avoid a
crash in the first place.
That's not great, we need to set *some* pointer in this case. The
obvious option would be NULL, but that means that the translate-code
also needs to support NULL-pointers here.
Instead, let's point to a small, static buffer that contains enough
zero-data for the largest possible vertex attribute. This avoids having
to add more NULL-checks.
Fixes: a8e8204b18 ("gallium/u_vbuf: support NULL-resources")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7773>
To reduce flakes, separate out the dEQP-EGL tests that are intentionally
triggering GPU hangs. This avoids some kernel side issues with bad
handling of ringbuffer-full scenarios, causing innocent tests to flake.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10560>
Otherwise it is next to impossible to figure out *which* trace is
hanging (because you don't get artifact upload if the CI job hits the
overall 60min timeout).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10490>
Add AMDGPU to LLVM_TARGETS_TO_BUILD.
Remove explicit CMAKE_CXX_COMPILER from libclc to dodge regression from
newer CMake. The potential range seems like (3.19.7, 3.20.1].
Add -Dc_std=c17 to support static_assert.
Add -Dcpp_std=vc++latest to support designated initializers.
Add -Dvulkan-drivers=amd for RADV.
Add -Dlibelf:warning_level=1 because of warnings as error.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6162>
It was disabling the building of drivers that were needed in some
devices.
After merging we will anyway only have the modules we want (amdgpu atm),
so it's not really needed.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10139>
Previously we were using only the replay profile, but we want to test
with the other ones now.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10139>
This will be used to test llvmpipe against Xvfb and freedreno against
Xorg. We keep the core deqp testing on surfaceless because
--deqp-surface-type=pbuffer fails on x11_egl_glx, =fbo has never worked in
VK-GL-CTS, and =window would increase test runtime for all the
swapbuffers.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10240>
Finally LAVA users will be able to see deqp XMLs on failures from the
job's artifacts browser. This replaces a couple of one-off minio uploads
in the piglit runner.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10297>
For baremetal CI we are using a 'dummy' rootfs as it is required by
abootimg. This causes NFS boot problems when using u-boot as bootloader.
[ 13.230968] RAMDISK: gzip image found at block 0
[ 13.235645] using deprecated initrd support, will be removed in 2021.
[ 13.243106] List of all partitions:
If we disable CONFIG_BLK_DEV_INITRD nfsroot works.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10024>
They're not warning-clean yet, but we can enable -Werror in general and
just allow the existing types of warnings as exceptions with
-Wno-error=[...]. This way, new warnings of all other types will be
prevented from entering the code base.
Once all warnings of a certain type have been eliminated in a job, the
exception for that type can be dropped from that job. This provides a
realistic path to a fully warning-clean CI build in the future.
v2:
* Use echo -n (Juan A. Suarez)
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10220>
This is possible again thanks to
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955 , and
this MR requires rebuilding all templates based docker images anyway,
so we can pull in the latest templates for free.
We need to exclude /dev/* when unpacking rootfs tarballs for the
arm_test image, since x86 container build jobs do not allow mknod
anymore with current templates. The baremetal test jobs have another
filesystem mounted on /dev anyway.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9833>
Among other things, this gets us GCC 10 (was 6).
Requires some changes to third party components we use:
* Install apitrace (& waffle) from Debian; was hitting issues with the
local build, and it's the same version 9.0 anyway.
* Update Fossilize to a newer commit which builds with GCC 10.
* apt.llvm.org repositories are no longer needed.
* Use an SPIRV-LLVM-Translator commit which builds with LLVM 11.0.1.
* Install XCB packages from Debian, 1.13 fails to build with Python 3.9.
* Install wayland-protocols from Debian, 1.12 is too old for
libgtk-3-dev in bullseye.
LLVM 7/8 packages are no longer available.
Also adapt expected test results to Xvfb now exposing multi-samle
GLXFBConfigs.
v2:
* Install clang instead of clang-11.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3124
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9833>
v2:
- Bump up MESA_ROOTFS_TAG instead of arm_build (Michel)
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10136>
So far we were using a telnet-based script to communicate with the PoE
Switch to turn on/off the network ports the DUTs are connected.
But this script does not seem very reliable because from time to time the
switch fails to execute the steps in the script.
As the PoE Switch we use is a smart one with support for SNMP protocol,
it would be easier to use it to handle it, which allows to turn on/off
the ports without going through the nasty telnet steps
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9954>
libpciaccess-dev:$arch from STABLE_EPHEMERAL down to the main list of packages
in .gitlab-ci/container/cross_build.sh, and bumping the arm_build, i386_build,
ppc64el_build & s390x_build tags again.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
----
.gitlab-ci.yml | 8 ++++----
.gitlab-ci/container/cross_build.sh | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10095>
This allows to fix some credential leaks and provides compatibility with
the latest LAVA version.
Avoids failures when the LAVA instance returns Error 500
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9851>
After a recent LAVA update, failures in running a test would cause the
whole test to be retried. We only want for the boot to be retried (in
case of infrastructuer errors), so set the nr of retries for tests to 1.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9950>
The test timeout shouldn't be bigger than the whole job's timeout.
Also, reduce the timeouts to a more sane level and remove timeouts that
don't bring value.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9950>
Works around the other Missing case we've seen in CI, possibly fixes the
underlying issue, and adds support for comments in xfails lists.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9806>
The merged image contains kernels & rootfs for both arm64 & armhf
baremetal test jobs, and is smaller than either arm{64,hf}_test image
before.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
Doing so in an x86 container via qemu was slow, and started failing
recently after updating to a newer qemu version.
This also results in smaller arm*_test* docker images, since we need to
install fewer Debian packages in them.
As a bonus, this turns some piglit tests from fail to pass (Or maybe
they'll turn out to be flakes? They've passed at least 3 times in a
row).
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
We use the CI-built kernel+rootfs these days. I haven't bumped image tags
because the files are definitely unused, and I'm rebuilding it all in the
next commit.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
Waffle building requires libgl1-mesa-dev to add support for GLX. This
package is pulled automatically in arm64 container as a suggested
package, but no in armhf. Which means we end up having support for GLX
in waffle in arm64 but not in armhf.
Thus let's install explicitly this package to have support in both
cases.
Reviewed-by: Andres Gomez <agomez@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9562>
Without a way to exclude specific subdirectories, keeping the list
of all subdirectories which need to be tested is error prone.
It's better to run CI slightly more often than to miss it when
it is needed.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9609>
Getting piglit to fit onto our test devices was proving difficult, and we
need the ability to handle flakes, so switch to the rust piglit runner
that @pepp wrote as part of the deqp-runner repo which gives us flake
detection, sharding across boards, fractional runs, and almost half the
runtime.
It doesn't handle piglit subtests yet, but if you can't run piglit's
python on your devices because it's too bloated and unstable, this is a
way forward.
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9468>
This adds a piglit runner that we'll be using on freedreno, better
xfail/unexpectedpass handling for some cases (Missing->Pass, Warn->Warn),
better error logging for the Missing issue we've had in CI, a fix for a
source of Missing, and a pile more unit tests.
As a result, we now catch that the Missing results for a bunch of our
tests have gone away.
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9468>
As Windows now builds llvmpipe and lavapipe, we should be sure to run
their builds when these change.
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9518>
Keep the strace logs in job artifacts for tests which timed out.
This can be useful for figuring out why a timeout occurred.
strace cannot be used in jobs where ASAN is enabled, because ASAN's
leak checker also uses ptrace(), which isn't possible within strace.
Suggested-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9472>
In jobs where the wrapper isn't used, this leaves the
<build directory>/meson-logs/testlog.txt filename unchanged.
Also prepares for using different wrapper scripts in different jobs.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9472>
Windows doesn't actually distribute a full TLS CA certificate store, but
pulls them in over time with Windows Update. Try to prime it by manually
pulling the certificates and installing them.
This bumps the Windows tag to force a rebuild.
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9618>
So far, testing VC4 and V3D/V3DV requires the CI runners having access
to a Raspberry Pi 3/4 kernel, and the correspondent modules and
bootloader files. If a different kernel must be used, it means touching
the runners to provide them.
This commit adds the option to define an URL pointing to a (compressed)
tarball containing such files, without requiring dealing with the
runners. This link is provided through the `BM_BOOTFS` job variable.
The tarball must contain two directories in the root: a `/boot`
directory (containing the kernel, DTBs and bootloader files), and a
`/lib/modules` (or `/usr/lib/modules`) with the kernel modules.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9527>
Build deqp-runner with the `--locked` option to use dependencies
versions specified in `Cargo.lock`.
v2: Bump image tags.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Suggested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9368>
Since we don't manually enumerate the drivers using it, we have to retest
all drivers when changing it (which basically never happens, anyway).
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9353>
So far we were retrying the testing (through device rebooting) if we did
not detect the boot sequence.
But found a couple of times that the serial log can also be "lost"
during the testing process. In all those times a manual retry of the job
was enough to complete the test.
Thus, let's apply the retry once automatically in this case.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9335>
Highlight in red errors from the baremetal run, so user is more aware of
what happened.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9335>
Commit bcea453d4a removed the summary from the expected piglit
results, but handling of results when using parallel jobs was also doing
the same, which ends up on removing too many lines from results.
Fixes: bcea453d4a ("ci/piglit: Stop including the test counts at the
end of expectations.")
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9286>
Since the job is manual, I missed it in the move and it got dropped from
the artifacts.
Fixes: 60d413b894 ("ci: Move the piglit expectations lists to the per-driver CI dirs.")
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9226>
It's just a ton of fuss for driver developers fixing piglit tests. This
makes the trace expectation files pretty silly (empty expectation, but
you'll get a diff to a non-empty result when something fails)
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9226>
This allows to split a piglit job in several parallel jobs, to speed up
the execution.
Due piglit restrictions, this only works for single profiles. Otherwise
an error will be shown in the runner.
Also, a new gitlab job variable `PIGLIT_TESTS` is introduced that
contains the excluded/included tests with `-x` or `-n`. The rest of the
piglit options go to `PIGLIT_OPTIONS` (like `--timeout n`).
v2 (Andres):
- Replay profile is supported in parallel jobs.
- Bail out inmediately if parallel jobs is tried with multiple
profiles.
- Use testlist only when doing parallel jobs.
- Do not drop pass tests when filtering executed tests.
- Get rid of PIGLIT_FRACTION.
v4:
- uncommit unrelated change (Andres).
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9022>
This means less custom test-source-dep stuff for these drivers, though it
means that touching the CI expects files will cause a bit more retesting:
- broadcom drivers retest as a group (but Igalia requested that
organization of CI files)
- radv+radeonsi retest as a group
- lvp+llvmpipe retest as a group
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9161>
Once the extension fix is merged the CI results change appreciably.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9185>
On top of the last kernel tree I added a couple of DT changes for db820c
from the qcom landing tree necessary for bringing up the GPU, and a fix to
my OOB cleanups fro cheza. I also enabled the CPU clock driver for db820c
so we can turn on SMP and not leave jobs stranded on a 19Mhz CPU or whatever.
This causes us to need a bit of updating of our TF expectations since the
order of jobs changes a bit.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9144>
I missed this regression in the "start using Xorg" branch since the piglit
runs are manual. I made the piglit runs accidentally require a core
context, which a5xx can't do (it's only GL 3.1).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9144>
We have to disable the GLSL unit tests because with asan it runs way too
much code under qemu and times out. Those unit tests have coverage on
x86, anyway.
I also included a vulkan run, which is disabled by default due to timeouts
that I need to sort out still. It should be a useful tool for turnip
devs, though.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9070>
https://github.com/LunarG/gfxreconstruct/issues/328 and
https://github.com/LunarG/gfxreconstruct/issues/402 are already fixed
in the "master" branch.
Updated the piglit version so it supports this version.
Additionally, LunarG's VulkanTools are not built any more since
GFXReconstruct is now able to generate screenshots on its own without
using the VK_LAYER_LUNARG_screenshot layer.
v2:
- Explain the VulkanTools removal in the commit log (Martin).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9032>
We are now using pages.
v2:
- Define a helper variable for the artifacts base URL (Juan).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Eric Anholt <eric@anholt.net> [v1]
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9092>
When running with baremetal, the results path becomes //results. The
unexpected double backslash causes troubles when using sed
later.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9092>
This add support for the Intel Apollo Lake and Gemini Lake families,
however the job will be disabled by default unless the developer
manually hit play for the iris-apl-traces and iris-glk-traces jobs in
GitLab CI.
These devices are still under experimental level support in
the Lava lab and are not guaranteed to work reliably yet. Once they
become reliable and more resilient we will enable them by default in
MesaCI.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8162>
For imx6 we need the following fec ethernet fix:
c730ab423bfa ("net: fec: Fix temporary RMII clock reset on link up")
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9046>
Add OpenGL and Vulkan testing for V3D and V3DV respectively.
Add also a couple of manual piglit jobs for V3D.
v2:
- Replace custom mustpass with running fraction of tests (Eric)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8745>
When loading Vulkan ICD file, it uses the CPU machine identifier to
load the correct one, in case multiple versions are installed.
This is fine if the machine where Mesa has been built and the machine
where the test is run are exactly the same. But this is not always the
case. As example, for armhf architecture, the machine where Mesa is
built is identified as `arm7hlf`, but the Raspberry Pi 4 is identified
as `armv7l`, so it will fail to load the ICD file, though both are
totally compatible.
This allow to define the architecture instead.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8745>
This new version contains several fixes.
v2:
- Bump lava kernel+rootfs tag (Eric)
v3:
- Drop {x86,arm}_test-base tag bumps (Michel)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8990>
It's failed for almost a month, so right now it's mostly noise and a
waste of CI resources.
It can easily be re-enabled by an MR which makes it pass again.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8976>
spec@arb_timer_query@timestamp-get seems to fail on D3D12 / Windows
every now and then. Until that's been figured out, let's disable the
test in CI.
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8978>
The Vulkan spec says the following for vkCmdBeginTransformFeedbackEXT:
"For each element of pCounterBuffers that is VK_NULL_HANDLE, transform
feedback will start capturing vertex data to byte zero in the
corresponding bound transform feedback buffer."
While not quite as explicit, similar wording exists for
vkCmdEndTransformFeedbackEXT in "Valid Usage" section.
So, this means that we should handle NULL in this case, and simply
ignore the corresponding reads and writes.
This fixes a whole lot of crashes when using transform-feedback with
Zink.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8982>
I cargo-culted these from the llvmpipe tests, but they seem to pass and
not take much time or memory at all, so let's try enabling them. If this
works fine, we might want to try the same for llvmpipe as well...
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8979>
There's an oddity in the .lava-test:amd64 build rules; we depend on and
use the ARM images instead of the AMD64 images. The reason for this is
kind of silly; we need the Docker image to match the architecture of the
runner, which happens to be ARM.
So this isn't at all about the target architecture, but more of a Docker
detail.
Hopefully documenting this will prevent others from spending time being
puzzled about this in the future.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8967>
The vulkan spec says the following about vkMapMemory:
"ppData is a pointer to a void * variable in which is returned a
host-accessible pointer to the beginning of the mapped range. This
pointer minus offset must be aligned to at least
VkPhysicalDeviceLimits::minMemoryMapAlignment."
So let's report the same value as the gallium-driver reports, otherwise
we'll fail to adhere to the alignment requirement.
This fixes a few Piglit failures for Zink.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/4267
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8965>
Emma Anholt
Andres Gomez
Daniel Stone
Tomeu Vizoso
Gustavo Padovan
Tapani Pälli
Antonio Caggiano
Alyssa Rosenzweig
Eric Anholt
Juan A. Suarez Romero
Ryan Houdek
Erik Faye-Lund
Rob Clark
Ian Romanick
Corentin Noël
James Park
Jesse Natalie
Christian Gmeiner
Michel Dänzer
Leo Liu
Matt Turner
Mike Blumenkrantz
Danylo Piliaiev
Dave Airlie
Hoe Hao Cheng