v2: test for libelf once, check in both radeon and clover
CC: Tom Stellard <tom@stellard.net>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
We'll need to update gallivm for the interface changes in LLVM 3.6, and
the fewer the number of older LLVM versions we support the less hairy that
will be.
As consequence HAVE_AVX define can disappear. (Note HAVE_AVX meant
whether LLVM version supports AVX or not. Runtime support for AVX is
always checked and enforced independently.)
Verified llvmpipe builds and runs with with LLVM 3.3, 3.4, and 3.5.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Previously, when no pkg-config was available for
libexpat we would just add the needed linking
flags without any extra check.
Now, we check that the library and the headers are
also installed in the building environment.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
We don't have GALLIUM_STATE_TRACKERS_DIRS any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This reverts commit bbe6f7f865.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This patch adds a skeleton VA-API state tracker,
which is filled with live in the subsequent patches.
v2: fixes in configure.ac and va state_tracker Makefile.am
v3: do not link against libva.
detect libva version, and correctly set driver entrypoint name.
rebase(cleanup) targets/va/Makefile.am
v4: cleanup va version auto detection
add back targets/va/va.sym
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This is the only guaranteed way get the patch level for llvm,
since the define cannot always be found in config.h depending
on the version of llvm or the build system used.
CC: 10.2 10.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jonathan Gray <jsg@jsg.id.au>
Rather than having double negatives -> disable-opencl, default=no
simply use enabled/disabled. It makes things a bit easier for the
reader and consistent throughout the file.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Rather than using hardcoded values honor the value set at libvdpau
build time - i.e. the moduledir variable from vdpau.pc
Update the omx description to match reality while we're here.
Cc: Christian König <deathsimple@vodafone.de>
Cc: Alexandre Demers <alexandre.f.demers@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80615
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The location of the egl driver(s) is matter that we should have
never exposed to the user. Currently the dri2 driver is built
into the libEGL loader, with the gallium based one soon to follow.
v2: Fold EGL_DRIVER_INSTALL_DIR within the makefiles. Suggested by Matt.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80615
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The parameter used to control where the gallium pipe-drivers
were installed, but was broken since
commit 45270fb0fd
Author: Matt Turner <mattst88@gmail.com>
Date: Thu Sep 13 10:45:01 2012 -0700
targets/pipe-loader: Convert to automake
Considering that nowadays the pipe-drivers can be used by
more than just the opencl target, even fixing this up will
not be the best idea.
Cc: Matt Turner <mattst88@gmail.com>
Cc: Francisco Jerez <currojerez@riseup.net>
Buzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61415
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Was only tracked to be printed at the end of configure, but configure
quits if it can't build something we requested, rather than silently
dropping it, so printing these directories has little use.
Note that I had to add support for testing the packed attribute to
m4/ax_gcc_func_attribute.m4.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com> [C bits]
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Presumbly this will let clang and other compilers use the built-ins as
well.
Notice two changes specifically:
- in _mesa_next_pow_two_64(), always use __builtin_clzll and add a
static assertion that this is safe.
- in macros.h, remove the clang-specific definition since it should
be able to detect __builtin_unreachable in configure.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com> [C bits]
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Added by commit a75c6163, but no longer used.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
The respective HAVE_{SOFT,LLVM}PIPE are already descriptive
enough. Additionally the svga modules does not really use either
one, but the auxiliary draw & gallivm modules.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
181581280b changed the way the
llvm-config version is read from sed to grep and introduced
a requirement for gnu grep extension that treats BREs as EREs.
Avoid this by calling egrep instead of grep which should be
able to handle EREs everywhere.
This allows Mesa to build on OpenBSD again.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Mesa already defines _GNU_SOURCE for glibc based systems and defining
_GNU_SOURCE will break the Mesa build on other systems such as OpenBSD.
_GNU_SOURCE only seems to be included in llvm-config output when
LLVM is built via autoconf and not when it is built by cmake.
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Superseded by HAVE_LOADER_GALLIUM. The latter has a *DRM* brethren
making the whose easier on which one to keep.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
With the gallium megadrivers we've converted most ST to optionally
use either statically linked in or shared pipe-drivers.
The hardcoded switch forgot to conditionally enable the build of the
shared pipe-drivers which resulted in them being constantly build.
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
Cc: James Ausmus <james.ausmus@intel.com>
Reported-by: James Ausmus <james.ausmus@intel.com>
Tested-by: James Ausmus <james.ausmus@intel.com>
Bugzilla: https://code.google.com/p/chromium/issues/detail?id=412089
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Just drop the conditional and simplify our build. This means that
it'll build every time, but it does not require any dependencies nor
does it take that long to compile 200 lines of boilerplate code.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The variable was unused and gave false information. The need for nonnull
winsys currently does not relate as it used to. Nowadays one can mix and
match more freely with plenty of winsys' to make your head spin.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
With recent commit we removed the NEED_NONNULL_WINSYS checks when
selecting the hardware (inc svga) winsys. svga has only one winsys
that explicitly requires libdrm (via it's bundled version of
vmwgfx_drm.h) but configure.ac never really checks for it.
Add the check early to prevent people from shooting themselves when
they select the driver but lack libdrm.
$ ./autogen.sh --disable-dri --disable-egl --disable-gallium-llvm
--with-dri-drivers=swrast --with-gallium-drivers=svga,swrast
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82539
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Make sure to check the presence of the module in order to pick the
correct libs flag and before feeding them to the compiler/linker.
Current libXvMC*, libvdpau* and libomx_mesa depends unconditionally
upon xcb, due to their usage of the aux/vl gallium module.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Make sure to check the presence of the module in order to pick the
correct libs flag and before feeding them to the compiler/linker.
Current libEGL depends conditionally (when building with x11 platform)
upon xcb.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Make sure to check the presence of the module in order to pick the
correct libs flag and before feeding them to the compiler/linker.
Current libGL depends conditionally (when building with dri3) upon
xcb 1.9.3 and unconditionally on ancient xcb functions -
xcb_generate_id and xcb_request_check amongst others.
v2: Use PKG_CHECK_EXISTS() when checking for dri3 xcb.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80848
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
As older versions of gnu ld did not support --dynamic-list check to see
if it is supported before using it. Non gnu linkers such the apple one
likely lack this option as well.
Fixes the build on OpenBSD which has binutils 2.15 and 2.17.
The --dynamic-list option seems to been have introduced sometime after
binutils 2.17 was released as it is present in 2.18.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This reverts commit 6a19bb56e0.
The above commit disabled the default build of xvmc as the xvmc tests
were failing. As pointed out by Ilia, the tests are "broken by design"
as they do not test the object that is build but the one that is
installed and setup on the workstation.
With previous commit we moved the programs from the 'make check' to
noinst automake target. This way they won't be run but will be around
for people to use them.
Cc: Tom Stellard <thomas.stellard@amd.com>
These two were added ages ago, with an explicit comment "Hacks ..."
They have been insufficient for years and maintainers needed to
explicitly handle the build themselves.
Rather than lying and pretending that it works, just kill this hack and
let maintainers build things the way it should be done for their
distribution.
Document the removal in the release notes.
Suggested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This reverts commit 2af28040d6.
The commit was resolving an issue where libtool will not setup the
environment correctly when one explicitly provides --enable-{32,64}-bit
at configure time. It was caused due to the "-m32,64" C{,XX}FLAGS being
set too late relative to LT_INIT.
At the same time this cases the enable_static to be incorrectly set,
amongst others leading to build issues. Rather than being smart and
trying to handle 32/64 bit build ourselves it may be better to delegate
it to the builder/maintainer. The latter should now know better which is
the correct(most appropriate) method.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82536
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82546
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com>
When the compiler is not capable/does not accept -msse4.1 while the target
has the instruction set we'll blow up as _mesa_streaming_load_memcpy is
going to be undefined.
To make sure that never happens, wrap the runtime cpu check+caller in an
ifdef thus do not compile that hunk of the code.
Fix the android build by enabling the optimisation and adding the define
where applicable.
v2: autoconf conditionals end with "fi" rather than endif.
v3: Wrap the definition and call to intel_miptree_{un,}map_movntdqa in
if defined(USE_SSE41). Spotted by Matt.
Cc: Matt Turner <mattst88@gmail.com>
Cc: Adrian Negreanu <adrian.m.negreanu@intel.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Yet another makefile less to worry about.
v2: Add state_trackers and targets on a single SUBDIRS line.
Requested by Matt.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
One makefile less, with the potential of further compacting the
automake build.
v2: Rebase on top of vc4 changes.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Rather than having two separate almost empty and identical makefiles,
compact them thus improving the configure and build time.
Additionally this makes the automake build symmetrical to the scons
and android one.
v2: Rebase on top of vc4, compact drivers + winsys on a single line.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
A while back we've mandated that gbm requires enable_dri,
thus this check is no longer required.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The former is the only user of the latter. As such building gbm
without egl makes little to no sense.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Moving LT_INIT after setting completely (AM_)C(XX)FLAGS and LDFLAGS.
LT_INIT needs them as they are expected to be used all along
the compilation when the macro runs its tests to determine among other
things the host type.
For info, see http://www.gnu.org/software/libtool/manual/html_node/LT_005fINIT.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50754
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Tested-by: Tapani Palli <lemody@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
ec8ebff "Check for dladdr()" erroneously uses LDFLAGS rather than LIBS to add
-ldl to the dladdr check.
Replace the workaround in 39a4cc4 of explicitly checking in libdl, with a more
correct approach of using LIBS.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
This mostly just takes every draw call and turns it into a sequence of
commands that clear the FBO and draw a single shaded triangle to it,
regardless of the actual input vertices or shaders. I copied the initial
driver skeleton mostly from freedreno, and I've preserved Rob Clark's
copyright for those. I also based my initial hardcoded shaders and
command lists on Scott Mansell (phire)'s "hackdriver" project, though the
bit patterns of the shaders emitted end up being different.
v2: Rebase on gallium megadrivers changes.
v3: Rebase on PIPE_SHADER_CAP_MAX_CONSTS change.
v4: Rely on simpenrose actually being installed when building for
simulation.
v5: Add more header duplicate-include guards.
v6: Apply Emil's review (protection against vc4 sim and ilo at the same
time, and dropping the dricommon drm bits) and fix a copyright header
(thanks, Roland)
Use both macros as in some cases using AC_CHECK_FUNCS alone may fail.
Thus HAVE_DLADDR will not be defined, and as a result most of the code
in megadriver_stub.c will not be compiled. Breaking the backwards
compatibility between older libGL/xserver(s) and DRI megadrivers.
Cc: Jon TURNEY <jon.turney@dronecode.org.uk>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
[Emil Velikov] Commit message.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The tests in an empty stub, which we're currently building twice.
If anyone is interested in expanding it (adding actual tests) they
can always bring it back.
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This hash table is used in core Mesa, the GLSL compiler, and the i965
driver, which makes it a good candidate for the new src/util module.
It's much faster than program/hash_table.[ch] (see commit 6991c2922f
for data), and José's u_hash_table.c has a comment saying Gallium should
probably consider switching to a linear probing hash table at some point.
So this seems like the best candidate for a shared data structure.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
v2 (Jason Ekstrand): Pick up another hash_table use and patch up scons
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
For a long time, we've wanted a place to put utility code which isn't
directly tied to Mesa or Gallium internals. This patch creates a new
src/util directory for exactly that purpose, and builds the contents as
libmesautil.la.
ralloc seemed like a good first candidate. These days, it's directly
used by mesa/main, i965, i915, and r300g, so keeping it in src/glsl
didn't make much sense.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
v2 (Jason Ekstrand): More realloc uses and some scons fixes
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We don't support this type of X acceleration and we never did.
Other drivers might want to do the same thing.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Add a new winsys and target that can be used with a dri2 state tracker
and loader instead of drisw. This allows to use gbm as a dri2/image
loader and avoid the extra copy from the backbuffer to the shadow
frontbuffer.
The new driver is called "kms_swrast", and is loaded by gbm as a
fallback, because it is only useful with the gbm platform (as no buffer
sharing is possible)
To force select the driver set the environment variable
GBM_ALWAYS_SOFTWARE
[Emil Velikov]
- Rebase on top of gallium megadriver.
- s/text/test/ in configure.ac (Spotted by Andreas Pokorny).
- Add scons support for winsys/sw/kms-dri and fix the build.
- Provide separate DriverAPI, due to different InitScreen hook.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Principle of least surprise: --enable-debug should enable debugging.
Ages ago, Mesa's build system only added -g in dri-debug builds (yay for
the static Makefiles). If you forgot to change it (or wrap the build
with custom scripts), you would often be disappointed when trying to gdb
Mesa bugs. New developers, that may not yet have custom scripts, will
have this same issue.
I think we should enable experienced developers to do what they want,
and make things easier for new developers. I already pass '-ggdb3 -O1'
or '-ggdb3 -Og' for CFLAGS, and I don't want configure to change them
for me.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
It seems like for the most part, different behaviors, workarounds, etc,
should be conditional on GPU patch revision (ie. a320.0 vs a320.2)
rather than GPU id (a320 vs a330).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Adjust definition of _XOPEN_SOURCE appropriately for use of strndup() added with
commit da3a47d6
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Convert the final dri target to the single DRI (megadriver) library.
Cleanup all the automake leftovers from the conversion stage and
update the scons build.
v2: Link in llvmpipe, when applicable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Move the driver_name to dri2/drisw and remove all the SPLIT_TAGETS
mayhem. In the next step we'll unify the dri and dri-swrast targets,
completing the gallium DRI megadriver.
v2: Remove leftover st/dri Makefiles from CONFIG_FILES. Spotted by
Thomas Helland.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Revert "build: Build on Cygwin with gnu99 instead of c99." and define
_XOPEN_SOURCE appropriately.
This reverts commit 53e36d333c.
Since Cygwin 1.7.18 (April 2013), it's headers correctly prototype strtoll()
when using -std=c99, and correctly prototype strdup() when _XOPEN_SOURCE is
defined appropriately, so this workaround is no longer needed.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Cc: Vinson Lee <vlee@freedesktop.org>
Convert the final hardware driver to a single dri provider which
includes all the pipe-drivers.
Update the scons build and drop the unused vmw_powf.c.
Cc: José Fonseca <jfonseca@vmware.com>
Cc: Brian Paul <brianp@vmware.com>
Cc: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Cc: Chia-I Wu <olv@lunarg.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
v2:
- Drop inclusion of the winsys wrapper and softpipe/llvmpipe.
- Remove old Makefile.am, target.c.
- Correctly append i915 to the megadrivers list.
Cc: Stephane Marchesin <stephane.marchesin@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Now we don't need a second dri module when using kgsl :)
Cc: Rob Clark <robclark@freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Related to previous commit, merge the separate dri targets to a single
one.
This is essentially all the buildsystem mayhem required for megaradeon.
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Similiar to other targets, we'd like to convert all the separate
targets into a single one, thus we'll minimize the duplication and
overall size of mesa. The conversion per API basis, with the drivers
available either statically or shared. Currently the former is the
default.
v2: Correctly append the version script to the linker flags.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Update all three build systems, and add freedreno to the android
build. Pending future work on the ST we can convert egl-static
to provide either static or dynamic access to the pipe-drivers.
There is no functional change with this patch.
v2: Don't add freedreno to android build, drop the wrapper winsys.
Cc: Chia-I Wu <olv@lunarg.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Now we can build the xa target (libxatracker) with either static
pipe-drivers or shared ones. Currently we default to static.
- Remove the unused CFLAGS/CPPFLAGS.
- Use GALLIUM_TARGET_CFLAGS where applicable.
v2: Update the printout messages at configure.
v3: Drop inclusion of the wrapper winsys and softpipe/llvmpipe.
Cc: Jakob Bornecrantz <jakob@vmware.com>
Cc: Rob Clark <robclark@freedesktop.org>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The radeonsi counterpart of previous commit - now libomx-radeonsi is
built into the libomx-mesa library. Providing a single library per API.
v2: Include the radeon winsys only when there is a user for it.
v3: Correcly include the winsys. Now with extra brown bag :\
Note: Make sure to rebuild the .omxregister file, by executing
$ omxregister-bellagio
This patch concludes the unification. Now libomx-mesa will be used
for all hardware - r600, radeonsi and nouveau.
Cc: Leo Liu <leo.liu@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
The r600 counterpart of previous commit - now the libomx-r600 is
built into the libomx-mesa library. Providing a single library per API.
v2: Include the radeon winsys only when there is a user for it.
v3: Correcly include the winsys. Now with extra brown bag :\
Note: Make sure to rebuild the .omxregister file, by executing
$ omxregister-bellagio
If you have more than one omx library (libomx-radeonsi, libomx-r600),
make sure to temporary move the unused one. By the end of the series
there will be only one library that will be used for all hardware -
r600, radeonsi and nouveau.
Cc: Leo Liu <leo.liu@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Similar to the vdpau/xvmc targets, we're going to convert the
multiple target libraries into a single one.
The library can be built with the relevant pipe-drivers
statically linked in, or loaded as shared modules.
Currently we default to static.
Note: Make sure to rebuild the .omxregister file, by executing
$ omxregister-bellagio
If you have more than one omx library (libomx-radeonsi, libomx-r600),
make sure to temporary move the unused one. By the end of the series
there will be only one library that will be used for all hardware -
r600, radeonsi and nouveau.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The r600 equivalent of previous commit.
v2: Correctly include the radeon winsys/radeon_common.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Similar to vdpau targets, we're going to convert the individual
target libraries into a single one.
The library can be built with the relevant pipe-drivers
statically linked in, or loaded as shared modules.
Currently we default to static.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Similar to previous commits, this allows us to minimise some
of the duplication by compacting all vdpau targets into a
single library.
v2: Include the radeon winsys only when there is a user for it.
v3: Correcly include the winsys. Now with extra brown bag :\
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Similar to previous commit, this allows us to minimise some
of the duplication by compacting all vdpau targets into a
single library.
v2: Include the radeon winsys only when there is a user for it.
v3: Correcly include the winsys. Now with extra brown bag :\
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Create a single library (for the vdpau api) thus reducing
the overall size of mesa. Current commit converts
vdpau-nouveau, with upcomming commits handling the rest.
The library can be built with the relevant pipe-drivers
statically linked in, or loaded as shared modules.
Currently we default to static.
Add SPLIT_TARGETS to guard the other VL targets.
Note: symlink handling is rather ugly and will need an
update to work with BSD and other non-linux platforms.
v2: Split the conversion into per-target basis.
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Will be used to control the linking mode of pipe-drivers
in gallium targets.
Keep this hardcoded to static, as the pipe-drivers bare
an unstable interface which we do not want to expose to
the normal user.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Commit e62b7d38a1 (configure: autodetect video state-trackers
when non swrast driver is present) added a check that caused
the autodetection to be omitted when we have the swrast gallium
driver. Whereas it should have skipped the VL targets when only
swrast was selected.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79907
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
LLVM is enabled by default for some architectures, but the test was failing
before that.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Always default to --enable-driglx-direct, now that will build driswrast, but
won't try to use dri[123] on platforms which don't have that.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Some untangling to fix building in the dri_platform=none, --enable-driglx-direct
case, where only driswast can be used.
Turn the test for including the glXGetScreenDriver()/glXGetScreenDriver()
interface used by xdriinfo from !GLX_USE_APPLEGL into a positive form, as it is
only useful when dri_platform=drm
Add additional GLX_USE_DRM tests so DRI[123] renderers are only used when
dri_platform=drm
Note that swrast and indirect must still be disabled in the APPLEGL case at the
moment, which makes things more complex than they need to be. More untangling
is needed to allow that
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Match the behavior of the SCons MinGW build.
This patch also fixes these build errors.
CC glapi_entrypoint.lo
glapi_entrypoint.c: In function 'init_glapi_relocs_once':
glapi_entrypoint.c:341:4: error: unknown type name 'pthread_once_t'
static pthread_once_t once_control = PTHREAD_ONCE_INIT;
^
glapi_entrypoint.c:341:41: error: 'PTHREAD_ONCE_INIT' undeclared (first use in this function)
static pthread_once_t once_control = PTHREAD_ONCE_INIT;
^
glapi_entrypoint.c:341:41: note: each undeclared identifier is reported only once for each function it appears in
glapi_entrypoint.c:342:4: error: implicit declaration of function 'pthread_once' [-Werror=implicit-function-declaration]
pthread_once( & once_control, init_glapi_relocs );
^
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Introduce a simple PCI identification method of looking up the answer
the /sys filesystem (available on Linux). Attempted after libudev, but
before DRM.
Disabled by default (available only when the --enable-sysfs configure
option is specified).
Signed-off-by: Gary Wong <gtw@gnu.org>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Without this, I get linking failures (static linking).
The static linking is sort of required for me, because otherwise Steam and
applications using the Steam runtime regularily fail because my LLVM was
compiled and linked against a newer libgcc_s, libstdc++, etc. and uses
features from those newer versions. And instead of Steam just not
starting, my X starts crashing, whenever libGL fails to load a (32 bit)
driver.
Since I hate crashes of X and I don't think Valve/Steam will behave like
a proper distribution soon (rebuilds versus current Debian Testing, since
they base their Steam OS off that), I need a radeonsi which carries its
own LLVM within and doesn't care about what the runtime sets. This means
linking Mesa statically.
v1 → v2: Move logic to configure.ac
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Define GLX_USE_APPLEGL, as config/darwin used to, to turn on specific code to
use the applegl direct renderer
Convert src/glx/apple/Makefile to automake
Since the applegl libGL is now built by linking libappleglx into libGL, rather
than by linking selected files into a special libGL:
- Remove duplicate code in apple/glxreply.c and apple/apple_glx.c. This makes
apple/glxreply.c empty, so remove it
- Some indirect rendering code is already guarded by !GLX_USE_APPLEGL, but we
need to add those guards to indirect_glx.c, indirect_init.c (via it's
generator), render2.c and vertarr.c so they don't generate anything
Fix and update various includes
glapi_gentable.c (which is only used on darwin), should be included in shared
glapi as well, to provide _glapi_create_table_from_handle()
Note that neither swrast nor indirect is supported in the APPLEGL path at the
moment, which makes things more complex than they need to be. More untangling
is needed to allow that
v2: Correct apple/Makefile.am for srcdir != builddir
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
- Don't require xcb-dri[23] etc. if we aren't building for a target with DRM, as
we won't be using dri[23]
- Enable a more fine-grained control of what DRI code is built, so that a libGL
using direct swrast can be built on targets which don't have DRM.
The HAVE_DRI automake conditional is retired in favour of a number of other
conditionals:
HAVE_DRI2 enables building of code using the DRI2 interface (and possibly DRI3
with HAVE_DRI3)
HAVE_DRISW enables building of DRI swrast
HAVE_DRICOMMON enables building of target-independent DRI code, and also enables
some makefile cases where a more detailled decision is made at a lower level.
HAVE_APPLEDRI enables building of an Apple-specific direct rendering interface,
still which requires additional fixing up to build properly.
v2:
Place xfont.c and drisw_glx.c into correct categories.
Update 'make check' as well
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Fix build for darwin, when ./configured --disable-driglx-direct
- darwin ld doesn't support -Bsymbolic or --version-script, so check if ld
supports those options before using them
- define GLX_ALIAS_UNSUPPORTED as config/darwin used to, as aliasing of non-weak
symbols isn't supported
- default to -with-dri-drivers=swrast
v2:
Use -Wl,-Bsymbolic, as before, not -Bsymbolic
Test that ld --version-script works, rather than just looking for it in ld --help
Don't use -Wl,--no-undefined on darwin, either
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This patch fixes this build error on Mac OS X.
CCLD libglapi.la
clang: warning: argument unused during compilation: '-pthread'
clang: warning: argument unused during compilation: '-pthread'
ld: unknown option: --no-undefined
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
-fstack-protector-strong is not supported by clang.
This patch fixes this build error on Fedora 20 with clang.
CXX gallivm/lp_bld_debug.lo
clang: error: unknown argument: '-fstack-protector-strong'
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75010
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
It makes more sense to link the core and common parts of the driver as the
target is build. Additionally this will help us drop duplicating symbols
for targets that static link mulitple pipe-drivers. Only egl-static needs
that currently with more to come.
To simplify things a bit add HAVE_GALLIUM_RADEON_COMMON variable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Commit 11623be934 was meant to have this hunk, which
I accidently dropped during git rebase.
Cc: 10.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jonathan Gray <jsg@jsg.id.au>
Both backends require --enable-dri, and building an empty libgbm
makes little to no sense. Error out at configure to prevent the
user from shooting themselves in the foot.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78225
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Unfortunately, Cygwin defines RTLD_DEFAULT (for glibc compatibility), but can't
provide dladdr(), so add a check for dladdr()
Since I don't think scons is ever used to build for Cygwin, just set HAVE_DLADDR
in SConscript, assuming that if we have RTLD_DEFAULT, we have dladdr().
Cc: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Rather than defining our own set of variables, use NEED_WINSYS_XLIB
and based on it include the sw/xlib winsys.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The function relies on the sw/dri winsys which is build only when --enable-dri
is set. Fixes build issues with the following config
./configure --disable-dri --with-gallium-drivers=svga --enable-xa
Issue can be reproduced with any hw gallium driver + st that uses the pipe-loader.
Cc: Brian Paul <brianp@vmware.com>
Reported-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This reverts commit 61bedc3d6b.
As the header is the one defining the API/ABI and is distributed
during installation, we should be using it rather than re-defining
the XA version in configure.ac.
Bump the version in the header to 2.2.0, to reflect what was the
original intent of commit 42158926c6.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
After the loader changes libudev is no longer required for
gbm or the egl drm/wayland platforms. Lets these build/run
on OpenBSD.
v2: preserve the libudev requirement for Linux as suggested
by Emil Velikov.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
With recent commit we started de-duplicating all of the compiler/
linker flags moving their handling inside Automake.inc.
This did not take into consideration that the above variable was set
at configure time, leading to issues on certain build combinations.
Move the variable to where it's used/handled thus cleaning up
configure.ac.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76848
Tested-by: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The pkg-config module was called "EXPAT" instead of "expat" in
PKG_CHECK_EXISTS. This seems to have been wrong because the wrong
argument was copied from PKG_CHECK_MODULES.
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
The xa version number had to be set in two places. In configure.ac and in
xa_tracker.h. Furthermore, xa_tracker.h is an installed header so we can't
use mesa internal defines. So therefore, at configure time, modify the
xa_tracker.h header to use the version given by configure.ac
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
By doing GC the linker removes all the symbols that are not referenced
and/or used by the final library. This results in a saving of ~100K
up-to ~600K per (stripped) binary (classic vs gallium drivers).
If interested one can ask the compiler to print the sections that are
removed using -Wl,--print-gc-sections.
v2: Check if ld supports the flag before using it.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com> (v1)
It makes little sense to enable the vdpau, xvmc and omx state-trackers
as they do not make use of (don't work with) the software driver.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
grep -q is easier to read and consistent with the rest of configure.ac.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Gallium osmesa links against the softpipe driver, thus the build
will fail if it's missing.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Evidently at least static OSMesa is still used as shared one
causes substantial increase in the load time for some programs
that use it (from seconds up-to ~30min).
Rather than forcing everyone to use shared mesa, revert commit
a6efbac9fb and default to shared
build when both shared and static are disabled.
v2: Whitespace cleanup, drop silly comment.
Reported-by: Burlen Loring <burlen.loring@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Currently only linux can make use of dri3, so it would make sense to
enable it explicitly for the platform.
Drop a duplicated libudev check while we're at it.
v3: Properly handle dri3 and reword commit message.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76377
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
It is quite hard to meet the dependency of the libxml2 python bindings
outside Linux, and in particularly on MacOSX; whereas ElementTree is
part of Python's standard library. ElementTree is more limited than
libxml2: no DTD verification, defaults from DTD, or XInclude support,
but none of these limitations is serious enough to justify using
libxml2.
In fact, it was easier to refactor the code to use ElementTree than to
try to get libxml2 python bindings.
In the process, gl_item_factory class was refactored so that there is
one method for each kind of object to be created, as it simplifies
things substantially.
I confirmed that precisely the same output is generated for GL/GLX/GLES.
v2: Remove m4/ax_python_module.m4 as suggested by Matt Turner.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This reverts commit d9b983519c.
Unfortunately it seems like rpath is evaluated before LD_LIBRARY_PATH,
so this breaks e.g. steam, as well as any other user of that env var,
if the llvm path happens to be where other libs also reside.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76082
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Static and shared builds were possible in the good old days
of static makefiles. Currently the build system does not
distinguish nor does anything special when one requests a
static build.
Print a warning message for the packager that static builds
are not supported and continue building shared libs.
Currently only Debian and derivatives use static build, and
they use it for building a Xlib powered libGL. This patch
will only change the warning message they are seeing but
the binaries produced will be identical.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
- As of commit cb080a10b68(configure.ac: Don't require shared LLVM when
building OpenCL) opencl does not mandate using shared llvm.
- Add a warning message that building with static llvm may cause
compilation problems.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Currenly configure.ac will print a warning when one is missing the package.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
The primary users of these are linux developers, although
it can be extended for *BSD and others if needed.
Fixes make install for Cygwin and OpenBSD at least.
v2:
- Wrap vdpau targets as well.
v3:
- Fold HAVE_COMPAT_SYMLINKS conditional within install*links.mk
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63269
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Some platforms different library extension - dll, dylib, a.
Honor that when we are creating the required links.
Rename LIB_EXTENSION to LIB_EXT while we're here.
With libglapi linking aside, building classic drivers on
non-linux platforms should be possible now.
v2: Resolve conflicts.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
All the variables were used before the automake conversion
and do not make sense (nor are used) currently.
Replace GL_LIB_NAME with lib$(GL_LIB).$(LIB_EXTENSION) for
apple-glx. The build has been broken for ages, but this will
ease the recovery process as it happens.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
The loader infrastructure for everything but DRI2 requires that udev be
present, so we can figure out an appropriate driver from the fd. We don't
have a portable solution yet, but presumably it will have similar lookup
based on the device node.
It will also be even more required for krh's udev-based hwdb support,
which lets us have a loader that actually loads DRI drivers not included
in the loader's source distribution.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75212
Reviewed-by: Matt Turner <mattst88@gmail.com>
`--enable-llvm-shared-libs` option was recently renamed as
`--with-llvm-shared-libs`, but several error messages still mention the
old option, causing confusing.
Trivial.
With commit 0432aa064b(configure: use shared-glapi when more than one
gl* API is used) we removed "disable shared-glapi when building without
dri" hunk.
In the good old days of classic mesa, dri and xlib-glx were mutually
exclusive thus the hunk made sense.
Currently enable-dri is used as a synonym for a range of things thus
it's more appropriate to handle xlib-glx explicitly.
Fixes a missing symbol '_glapi_Dispatch' in a xlib powered libGL,
build using the following
./autogen.sh --enable-xlib-glx --disable-dri --with-gallium-drivers=swrast
Cc: Brian Paul <brianp@vmware.com>
Reported-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This way, we are left with only the preprocessor flags and '-std=X'
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Jan Vesely
José Fonseca
Andres Gomez
Christian König
Eric Anholt
Rob Clark
Tom Stellard
Emil Velikov
Matt Turner
Jonathan Gray
Michel Dänzer
Alexandre Demers
Maarten Lankhorst
Jon TURNEY
Pali Rohár
Kenneth Graunke
Marek Olšák
Giovanni Campagna
Ian Romanick
Vinson Lee
Gary Wong
Kai Wasserbäch
Alex Deucher
Johannes Nixdorf
Thomas Hellstrom
Ilia Mirkin
Bruno Jiménez
Fabio Pedretti