The test pseudo-randomly makes allocations and deallocations with
the virtual memory allocator and checks that the results are
consistent. Specifically, we test that:
* no result from the allocator overlaps an already allocated range
* allocated memory fulfills the stated alignment requirement
* a failed result from the allocator could not have been fulfilled
* memory freed to the allocator can later be allocated again
v2: - fix if() in test() to actually run fill()
v3: - add c++11 build flag (Jason)
- test the full 64-bit range (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Require a version of libdrm with syncobj support.
v2: Don't require a libdrm_vc4, just bump core libdrm if vc4 enabled (by
anholt)
Signed-off-by: Stefan Schake <stschake@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This was missed in the move back to the local uapi copy.
libdrm_vc4 only seems to consist of headers that also exist in the
Mesa tree.
Signed-off-by: Stefan Schake <stschake@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This allows the driver to load against the merged kernel DRM driver. In
the process, rename most of the build system variables and gallium
plumbing functions.
Since the fence can outlive the context, and all it really needs to wait
on a fence is the pipe, use the new fd_pipe reference counting to hold a
ref to the pipe and drop the ctx pointer.
This fixes a crash seen with (for example) glmark2:
#0 fd_pipe_wait_timeout (pipe=0xbf48678b3cd7b32b, timestamp=0, timeout=18446744073709551615) at freedreno_pipe.c:101
#1 0x0000ffffbdf75914 in fd_fence_finish (pscreen=0x561110, ctx=0x0, fence=0xc55c10, timeout=18446744073709551615) at ../src/gallium/drivers/freedreno/freedreno_fence.c:96
#2 0x0000ffffbde154e4 in dri_flush (cPriv=0xb1ff80, dPriv=0x556660, flags=3, reason=__DRI2_THROTTLE_SWAPBUFFER) at ../src/gallium/state_trackers/dri/dri_drawable.c:569
#3 0x0000ffffbecd8b44 in loader_dri3_flush (draw=0x558a28, flags=3, throttle_reason=__DRI2_THROTTLE_SWAPBUFFER) at ../src/loader/loader_dri3_helper.c:656
#4 0x0000ffffbecbc36c in glx_dri3_flush_drawable (draw=0x558a28, flags=3) at ../src/glx/dri3_glx.c:132
#5 0x0000ffffbecd91e8 in loader_dri3_swap_buffers_msc (draw=0x558a28, target_msc=0, divisor=0, remainder=0, flush_flags=3, force_copy=false) at ../src/loader/loader_dri3_helper.c:827
#6 0x0000ffffbecbcfc4 in dri3_swap_buffers (pdraw=0x5589f0, target_msc=0, divisor=0, remainder=0, flush=1) at ../src/glx/dri3_glx.c:587
#7 0x0000ffffbec98218 in glXSwapBuffers (dpy=0x502bb0, drawable=2097154) at ../src/glx/glxcmds.c:840
#8 0x000000000040994c in CanvasGeneric::update (this=0xfffffffff400) at ../src/canvas-generic.cpp:114
#9 0x0000000000411594 in MainLoop::step (this=this@entry=0x5728f0) at ../src/main-loop.cpp:108
#10 0x0000000000409498 in do_benchmark (canvas=...) at ../src/main.cpp:117
#11 0x00000000004071b0 in main (argc=<optimized out>, argv=<optimized out>) at ../src/main.cpp:210
Signed-off-by: Rob Clark <robdclark@gmail.com>
Bump xa minor to signal that the underlying mesa version is suitable for dri3.
This is a bit ugly since it doesn't relate to a specific xa interface change.
Recently there has been a number of fixes in mesa that helps enabling dri3
without any significant regressions in automated testing and common desktop
usage latency. However, the xf86-video-vmware driver has no other way to tell
but inspecting the xa version.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The configure.ac logic added in commit
2ef7f23820 ("configure: check if
-latomic is needed for __atomic_*") makes the assumption that if a
64-bit atomic intrinsic test program fails to link without -latomic,
it is because we must use -latomic.
Unfortunately, this is not completely correct: libatomic only appeared
in gcc 4.8, and therefore gcc versions before that will not have
libatomic, and therefore don't provide atomic intrinsics for all
architectures. This issue was for example encountered on PowerPC with
a gcc 4.7 toolchain, where the build fails with:
powerpc-ctng_e500v2-linux-gnuspe/bin/ld: cannot find -latomic
This commit aims at fixing that, by not assuming -latomic is
available. The commit re-organizes the atomic intrinsics detection as
follows:
(1) Test if a program using 64-bit atomic intrinsics links properly,
without -latomic. If this is the case, we have atomic intrinsics,
and we're good to go.
(2) If (1) has failed, then test to link the same program, but this
time with -latomic in LDFLAGS. If this is the case, then we have
atomic intrinsics, provided we link with -latomic.
This has been tested in three situations:
- On x86-64, where atomic instrinsics are all built-in, with no need
for libatomic. In this case, config.log contains:
GCC_ATOMIC_BUILTINS_SUPPORTED_FALSE='#'
GCC_ATOMIC_BUILTINS_SUPPORTED_TRUE=''
LIBATOMIC_LIBS=''
This means: atomic intrinsics are available, and we don't need to
link with libatomic.
- On NIOS2, where atomic intrinsics are available, but some of them
(64-bit ones) require using libatomic. In this case, config.log
contains:
GCC_ATOMIC_BUILTINS_SUPPORTED_FALSE='#'
GCC_ATOMIC_BUILTINS_SUPPORTED_TRUE=''
LIBATOMIC_LIBS='-latomic'
This means: atomic intrinsics are available, and we need to link
with libatomic.
- On PowerPC with an old gcc 4.7 toolchain, where 32-bit atomic
instrinsics are available, but not 64-bit atomic instrinsics, and
there is no libatomic. In this case, config.log contains:
GCC_ATOMIC_BUILTINS_SUPPORTED_FALSE=''
GCC_ATOMIC_BUILTINS_SUPPORTED_TRUE='#'
With means that atomic intrinsics are not usable.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Perhaps with a new version of autoconf, I began seeing:
| checking the name lister (/usr/bin/nm -B) interface... ./configure: line 6973: External.*some_variable: command not found
| BSD nm
This is because AC_PROG_NM expands to
...
if $GREP 'External.*some_variable' conftest.out > /dev/null; then
lt_cv_nm_interface="MS dumpbin"
fi
...
I'm not sure if it's a bug in AC_PROG_NM that it doesn't call
AC_PROG_GREP, but it's easy enough for us to do it.
When compiling with LLVM 6.0 on x86 (32-bit) for Android, the test
fails to detect that -latomic is actually required, as the atomic
call is inlined.
In the code itself (src/util/disk_cache.c), we see this pattern:
p_atomic_add(cache->size, - (uint64_t)size);
where cache->size is an uint64_t *, and results in the following
link time error without -latomic:
src/util/disk_cache.c:628: error: undefined reference to '__atomic_fetch_add_8'
Fix the configure/meson test to replicate this pattern, which then
correctly realizes the need for -latomic.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Due using a new VP9 config we use, required VA API 0.39
Fixes: 413c5ca372 ("travis: update libva required version")
CC: 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Add needed infrastructure to use performance monitor
requests for queries.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Tested-by: Chris Healy <cphealy@gmail.com>
nir_intrinsics.c existed as a static file until commit 76dfed8ae2 began
generating it as part of the build process. autotools is incapable of
coping, and so a build-tree from before this commit would then fail with
it:
[4]: *** No rule to make target '../../../mesa/src/compiler/nir/nir_intrinsics.c', needed by 'nir/nir_intrinsics.lo'. Stop.
Add a few lines to configure.ac to update the broken build files.
Fixes: 76dfed8ae2 ("nir: mako all the intrinsics")
The currently we use the singular CHECK_HEADER combined with explicit
append to the DEFINES variable. That is a legacy misnomer, since it
requires us to add $DEFINES to every piece that we build.
Using the plural version of the helper sets the HAVE_ macro for us, plus
ensures it's passed to the compiler - if config.h is available in there
(not in the case of mesa) otherwise on the command line.
In hindsight, we should replace all the AC_CHECK_{FUNC,HEADER} instances
with the plural version (or even the _ONCE suffixed version) and drop
the DEFINES hacks.
Fixes: cbee1bfb34 ("meson/configure: detect endian.h instead of trying
to guess when it's available")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105717
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Tested-by: Clayton Craft <clayton.a.craft@intel.com>
We're trying to be -Wundef clean so that we can turn it on (and
eventually make it an error).
Note that the OMX code already used `#if ENABLE_ST_OMX_BELLAGIO` instead
of #ifdef; I could've changed these, but the point of -Wundef is to
catch typos, so we might as well make the change the right way.
Fixes: 83d4a5d5ae "st/omx/tizonia: Add H.264 decoder"
Fixes: b2f2236dc5 "st/omx/tizonia: Add H.264 encoder"
Fixes: c62cf1f165 "st/omx/tizonia/h264d: Add EGLImage support"
Cc: Gurkirpal Singh <gurkirpal204@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The have-new-DRI3 codepaths would never actually properly trigger, since
there was a typo in configure.ac which broke the version check. This
went unnoticed but for an error in config.log if you looked closely
enough.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Lukas F. Hartmann <lukas@mntmn.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Fixes: 7aeef2d4ef ("dri3: allow building against older xcb (v3)")
Cc: Dave Airlie <airlied@redhat.com>
I'm not sure everyone wants to be updating their dri3 in a forced
march setting, this allows a nicer approach, esp when you want
to build on distro that aren't brand new.
I'm sure there are plenty of ways this patch could be cleaner,
and I've also not built it against an updated dri3.
For meson I've just left it alone, since if you are using meson
you probably don't mind xcb updates, and if you are using meson
you can fix this better than me.
v3: just don't put a version in for dri3/present without
modifiers, should allow building with 1.11 as well
(feel free to supply meson followups)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
When it is detected that a window could have been flipped
but has been copied because of suboptimal format/modifier.
The Vulkan client should then re-create the swapchain.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Adds support for multiple planes and buffer modifiers.
v4: Rename "has_dri3_v1_1" to "has_dri3_modifiers"
v12: Multi-planar/modifier support is now DRI3 v1.2; also update release
versions
Tegra K1 and later use a GPU that can be driven by the Nouveau driver.
But the GPU is a pure render node and has no display engine, hence the
scanout needs to happen on the Tegra display hardware. The GPU and the
display engine each have a separate DRM device node exposed by the
kernel.
To make the setup appear as a single device, this driver instantiates
a Nouveau screen with each instance of a Tegra screen and forwards GPU
requests to the Nouveau screen. For purposes of scanout it will import
buffers created on the GPU into the display driver. Handles that
userspace requests are those of the display driver so that they can be
used to create framebuffers.
This has been tested with some GBM test programs, as well as kmscube and
weston. All of those run without modifications, but I'm sure there is a
lot that can be improved.
Some fixes contributed by Hector Martin <marcan@marcan.st>.
Changes in v2:
- duplicate file descriptor in winsys to avoid potential issues
- require nouveau when building the tegra driver
- check for nouveau driver name on render node
- remove unneeded dependency on libdrm_tegra
- remove zombie references to libudev
- add missing headers to C_SOURCES variable
- drop unneeded tegra/ prefix for includes
- open device files with O_CLOEXEC
- update copyrights
Changes in v3:
- properly unwrap resources in ->resource_copy_region()
- support vertex buffers passed by user pointer
- allocate custom stream and const uploader
- silence error message on pre-Tegra124
- support X without explicit PRIME
Changes in v4:
- ship Meson build files in distribution tarball
- drop duplicate driver_tegra dependency
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fixes: 26a9321d0a "freedreno: add global_bindings state"
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Allow only bellagio or tizonia to be used at the same time.
Detect tizonia package config file
Generate libomx_mesa.so and install it to libtizcore.pc::pluginsdir
Only compile empty source (target.c) for now.
GSoC Project link: https://summerofcode.withgoogle.com/projects/#4737166321123328
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Julien Isorce <julien.isorce@gmail.com>
v2: Refactor out screen functions to st/omx
Allows to keep all the code under st/omx (st/omx/tizonia and
st/omx/bellagio).
Reverts targets/omx_bellagio to omx as additions to existing files
is enough to compile for both bellagio and tizonia.
* autotools changes:
--enable-omx -> --enable-omx-bellagio
* meson changes:
-Dgallium-omx=false -> -Dgallium-omx=disabled
-Dgallium-omx=true -> -Dgallium-omx=bellagio
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Julien Isorce <julien.isorce@gmail.com>
Inspired-by: a similar patch for libdrm by Heiko Becker
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Also only check for wayland-scanner if building for the Wayland
platform.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: bfa22266cd ("vulkan/wsi/wayland: Add support for zwp_dmabuf")
Cc: Emil Velikov <emil.velikov@collabora.co.uk>
Reported-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105211
In line with wayland-client and wayland-server, move the check for
wayland-protocols into the wayland platform branch.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: bfa22266cd ("vulkan/wsi/wayland: Add support for zwp_dmabuf")
Cc: Emil Velikov <emil.velikov@collabora.co.uk>
Reported-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105211
pthread-stubs is no longer required on OpenBSD and has been removed.
libpthread parts involved moved to libc.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: 17.3 18.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Since radv and radeonsi removed support for LLVM 3.9 the distcheck
target got broken because SWR distribution needed 3.9.x.
After checking with George Kyriazis, SWR is OK with moving to LLVM 4.0
and above, which will solve this problem.
Fixes: 3bf1e036e8 ("amd: remove support for LLVM 3.9")
Cc: George Kyriazis <george.kyriazis@intel.com>
Cc: Tim Rowley <timothy.o.rowley@intel.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Dylan Baker <dylan@pnwbakers.com>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: George Kyriazis <george.kyriazis@intel.com>
v2: Only add as dependencies for gallium-osmesa and gallium-xlib
CC: <mesa-stable@lists.freedesktop.org>
Signed-of-by: Chuck Atkins <chuck.atkins@kitware.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The default was toggled a while back, but the text wasn't updated.
Fixes: bd526ec9e1 ("configure: Always default to
--enable-driglx-direct")
Cc: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part 1 of 2 (part 1 is autoconf changes, part 2 is C++ changes)
When only a single SWR architecture is being used, this allows that
architecture to be builtin rather than as a separate libswrARCH.so that
gets loaded via dlopen. Since there are now several different code
paths for each detected CPU architecture, the log output is also
adjusted to convey where the backend is getting loaded from.
This allows SWR to be used for static mesa builds which are still
important for large HPC environments where shared libraries can impose
unacceptable application startup times as hundreds of thousands of copies
of the libs are loaded from a shared parallel filesystem.
Based on an initial implementation by Tim Rowley.
v2: Fix comment placement pointed out by Bruce C.
Signed-off-by: Chuck Atkins <chuck.atkins@kitware.com>
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
CC: Tim Rowley <timothy.o.rowley@intel.com>
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
The next change wants to use some optional zlib functionality, however
not all platforms currently use zlib. Based on earlier Jordan Justen's
patches and their review feedback.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
For devices (and kernels) which support different priority ringbuffers,
expose context priority support.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Because patch is more common than tiny for talking about the 3rd element
of a version.
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Emil Velikov <emli.velikov@collabora.com>
Scott D Phillips
Marek Olšák
Stefan Schake
Eric Anholt
Rob Clark
Thomas Hellstrom
Thomas Petazzoni
Matt Turner
Nicolas Boichat
Juan A. Suarez Romero
Christian Gmeiner
Emil Velikov
Eric Engestrom
Mathias Fröhlich
Daniel Stone
Dave Airlie
Emil Velikov
Louis-Francis Ratté-Boulianne
Thierry Reding
Gurkirpal Singh
Jonathan Gray
Andres Gomez
Jon Turney
Chuck Atkins
Grazvydas Ignotas
Bas Nieuwenhuizen
Jason Ekstrand
Marc Dietrich
Vinson Lee
Dylan Baker